jitterbug Posted November 4, 2016 Share Posted November 4, 2016 Hey guys so I want to buy a ro/di unit on Black Friday. A couple years back I had one, but I was going through DI resin very fast think I was getting 50-60 gallons before the tds will start going up. Where I live we have well water I have been reading that well water has high CO2 which shortens the life of the DI risen. So my questions are what would be a good ro/di unit? And how can I test for CO2 in my water? Link to comment
RIP Sebastian Posted November 4, 2016 Share Posted November 4, 2016 Hey guys so I want to buy a ro/di unit on Black Friday. A couple years back I had one, but I was going through DI resin very fast think I was getting 50-60 gallons before the tds will start going up. Where I live we have well water I have been reading that well water has high CO2 which shortens the life of the DI risen. So my questions are what would be a good ro/di unit? And how can I test for CO2 in my water? I love my BRS System. CO2 isn't that important. Nick Link to comment
VW_TDI_02 Posted November 4, 2016 Share Posted November 4, 2016 Don't most reefers running off of well water use a water softener in order to remove some of the minerals before running the water through their RODI system? Link to comment
jitterbug Posted November 7, 2016 Author Share Posted November 7, 2016 Can I get some input form reefers that run a ro/di of well water? Link to comment
tetraodon Posted November 7, 2016 Share Posted November 7, 2016 Can I get some input form reefers that run a ro/di of well water? i run a refurbed spectrapure system on well. my RO/DI is plumbed before the softener, not my design but how it ended up working. i get 145 tds before, and zero after. Link to comment
VW_TDI_02 Posted November 7, 2016 Share Posted November 7, 2016 i run a refurbed spectrapure system on well. my RO/DI is plumbed before the softener, not my design but how it ended up working. i get 145 tds before, and zero after. Any ideas as to how often you have to change your resin and other filter media? Link to comment
tetraodon Posted November 8, 2016 Share Posted November 8, 2016 Any ideas as to how often you have to change your resin and other filter media? i bought the system in February, so its been active for about 9 months, still haven't had to change anything yet Link to comment
jitterbug Posted November 8, 2016 Author Share Posted November 8, 2016 i run a refurbed spectrapure system on well. my RO/DI is plumbed before the softener, not my design but how it ended up working. i get 145 tds before, and zero after. Cool tanks for the input i am looking at the spectrapure Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.