Jump to content
SaltCritters.com

AniZaTo's IM Fusion 10


anizato

Recommended Posts

So excited to announce the beginning of this tank! omgomgomg:welcome:

This is supposed to become a Flurry Clownfish + Anemone tank. Perhaps adding a Firefish or Goby+Shrimp pair. Was considering a Sexy Shrimp platoon of 5 or 7, but someone told me the Clownfish will destroy the shrimp that approaches the Anemone.

Flurry came from my 50gallon nano. She was being extremely aggressive towards Onyx the other clownfish. It seemed like they were two females, since they would both fight back pretty viciously, Onyx was victim to tile-surfing twice (luckily I was literally 3 feet away on both occasions when I heard the splash from the tank and found the babe on the floor), which is why I opted for separating them instead of getting rid of one. I prefer Onyx in the large display, as Flurry has a lot more detail to her pattern and can be better appreciated in the smaller display.

 

Light: AI Prime HD White

Display: IM Fusion 10

Filtration: InTank Media Basket w/Carbon bag + Filter Floss + 9lb of LR + 10lb of AragAlive Fiji Pink

Heater: Cobalt 50w

Flow: MJ1200 as return w/SpinStream Nozzle + Stock pump in display

ATO: AutoAqua Smart ATO Micro

 

Livestock:

1 Flurry Snowflake Clownfish

 

This is the shot at Home Depot from the stand pre-built

post-83895-0-33029000-1473901719_thumb.jpg

DIY proof...

post-83895-0-26677500-1473901716_thumb.jpg

post-83895-0-24886000-1473901718_thumb.jpg

 

Took 3 days to get here...

post-83895-0-31262300-1473901722_thumb.jpg

post-83895-0-35136700-1473901720_thumb.jpg

 

InTank perfectly built filter basket. SO AWESOME! I love this thing. I put the floss on the top, then a bag with carbon, and below is a smaller bag with GFO.

post-83895-0-22642200-1473901717_thumb.jpg

 

What do you guys think about the aquascape? I decided to stick the two rocks together, so it can be easier to move them around to have the Anemone facing the front of the display... riiiiiight!

post-83895-0-31108500-1473901713_thumb.jpg

 

post-83895-0-16708000-1473901714_thumb.jpg

post-83895-0-26004500-1473901715_thumb.jpg

post-83895-0-31308500-1473901721_thumb.jpg

 

Tank ran for the first 3 weeks without light.

Nitrate is at 10ppm and Ammonia is at 0ppm. I will probably let the tank run with the light on for a week before I put Flurry the Clownfish in there.

 

I checked the large tank, pH is 8.4 and SG is 1.024. Nano's pH is 8.2 and SG is 1.024. what do you guys think? Should I add the clownfish now or is it a good idea to wait? can't hurt, right? or is the lack of ammonia in there a problem?

Link to comment

Good choice my man. "Flurry Clownfish + Anemone tank" Music to my ears. I'm lovin' the Flurry.

 

Following!

 

- C. Smith

 

 

Thanks man! If it turns out like I envision in my mind, it should be pretty sick! Hopefully I can find a nem.

 

 

Yo everyone,

 

Currently shopping for Anemones. Looking for a 5" (minimum) BTA. Preferably some dark red color with a purple foot. I am open to amazing. Trying to purchase something before the end of the year 2016. If anyone has any suggestions or a BTA to sell please send them my way (:

Link to comment
SantaMonicaHelp

 

 

Thanks man! If it turns out like I envision in my mind, it should be pretty sick! Hopefully I can find a nem.

 

 

Yo everyone,

 

Currently shopping for Anemones. Looking for a 5" (minimum) BTA. Preferably some dark red color with a purple foot. I am open to amazing. Trying to purchase something before the end of the year 2016. If anyone has any suggestions or a BTA to sell please send them my way (:

I see your looking for a BTA. Nice choice. One of my most favorite anemones.

 

- C. Smith

Link to comment

Hey everyone!

 

Happy to announce the very first shipment of livestock has arrived!!

 

Exciting stuff! All of this was purchased by winning some bids over at Ebay from a Fish Store in San Diego Aqua-SD. They look pretty legit, the shipment was pretty awesome. Everything was packed nice and tight, no dripping, no leakage. No heatpack either because temp in California is around 80F anyway ...of course the day they arrived it was 67F in San Francisco... but whatever, I was here to receive them and float them immediately, which is where they currently, sitting in my 50gal sump (same temp as nano); this way I don't have to mess with switching off my ATO-heater-return or removing water from the Fusion10. I have some water to make, so they will float for a couple of hours.

 

For some reason the forum is no longer allowing me to upload pictures, they all turn up as an error. So I started an album on photobucket.

 

http://s1378.photobucket.com/user/anizatoreef/library/THE%20NANO

Link to comment
Cencalfishguy56

Hey everyone!

 

Happy to announce the very first shipment of livestock has arrived!!

 

Exciting stuff! All of this was purchased by winning some bids over at Ebay from a Fish Store in San Diego Aqua-SD. They look pretty legit, the shipment was pretty awesome. Everything was packed nice and tight, no dripping, no leakage. No heatpack either because temp in California is around 80F anyway ...of course the day they arrived it was 67F in San Francisco... but whatever, I was here to receive them and float them immediately, which is where they currently, sitting in my 50gal sump (same temp as nano); this way I don't have to mess with switching off my ATO-heater-return or removing water from the Fusion10. I have some water to make, so they will float for a couple of hours.

 

For some reason the forum is no longer allowing me to upload pictures, they all turn up as an error. So I started an album on photobucket.

 

http://s1378.photobucket.com/user/anizatoreef/library/THE%20NANO

ive ordered form aqua sd before through eBay and live sale on the weekends and even got two freebies!
Link to comment

ive ordered form aqua sd before through eBay and live sale on the weekends and even got two freebies!

 

Exactly! I ordered a Chalice and Kedd Reds Zoas package came with two freebie zoas!! They all colored up nicely. Just gonna let them grow a little before I glue them to the rock.

Link to comment

Hey everyone!

 

Happy to announce the very first shipment of livestock has arrived!!

 

Exciting stuff! All of this was purchased by winning some bids over at Ebay from a Fish Store in San Diego Aqua-SD. They look pretty legit, the shipment was pretty awesome. Everything was packed nice and tight, no dripping, no leakage. No heatpack either because temp in California is around 80F anyway ...of course the day they arrived it was 67F in San Francisco... but whatever, I was here to receive them and float them immediately, which is where they currently, sitting in my 50gal sump (same temp as nano); this way I don't have to mess with switching off my ATO-heater-return or removing water from the Fusion10. I have some water to make, so they will float for a couple of hours.

 

For some reason the forum is no longer allowing me to upload pictures, they all turn up as an error. So I started an album on photobucket.

 

http://s1378.photobucket.com/user/anizatoreef/library/THE%20NANO

I also use photobucket....just click copy on the pic in photobucket and paste it onto this site and pic shows up

Link to comment

Archived

This topic is now archived and is closed to further replies.

  • Recommended Discussions

×
×
  • Create New...