owlshead19 Posted August 12, 2016 Share Posted August 12, 2016 I just received two floss holders for my Fusion 20 and they don't fit. They are properly marked for the Fusion 20/25. Have there been recent changes in the Fusion 20 that have possibly caused this? The width of the chamber from side to side seems to be just a bit too small. I opened both to make sure I hadn't received the wrong size accidentally but they are both the same. Any ideas? edit- when I say the opening is a bit too small - I mean the holder is a bit too large. Link to comment
Kyl Posted August 12, 2016 Share Posted August 12, 2016 I had to slightly file the sides of mine down (same issue on the 20). Link to comment
inTank Posted August 12, 2016 Share Posted August 12, 2016 Please send us an email if you are unable to file them down to make work and we can help you. My best guess is we had some slide when being welded at the manufacture so the wall was not lined up and sticking out making it larger than it should be. That issue has been fixed, and we are only making one version (which was originally planned) to fit all tanks that is a little smaller to fit the Fusion 10 as well instead of having a choice. You can sand or file down the acrylic that is extending causing it not to fit. Link to comment
owlshead19 Posted August 12, 2016 Author Share Posted August 12, 2016 Ok - I'll try this Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.