jacoviii Posted August 8, 2016 Share Posted August 8, 2016 Ok So I jumped in on a White & Blue COB chip before the Dream chips came out. Now I'm looking to convert my old set up to a 5 Ch chip. So if I'm reading this right my MeanWell HLG-185H-36B is 18-36v & 5.2 A around 186 W All I would need is the LDD in 700ma to 1000maand I want to run something like this COB 5ch chip.Channel 1: EPISTAR ES-CADBV45P 45*45mil 4500K x 20 chips (32-34V @ 700mA-1000mA)Channel 2 : EPISTAR ES-CADBV45P 45*45mil 455nm Royal Blue x 20 chips (32-34V @ 700mA-1000mA)Channel 3 : EPILEDS EP-U4545K-A3 45*45mil 430nm Violet(UV) x 20 chips (32-34V @ 700mA-1000mA)Channel 4 : EPILEDS BH-R4242D-A1 42*42mil 660nm x 10 chips + Epistar ES--CADBV45P 490nm x 10 chips (27-29V @ 700mA-1000mA)Channel 5 : EPILEDS EP-U4545K-A3 45*45mil 410nm X 20 chips (32-34V @ 700mA-1000mA) Ok I need a bit more help I might just get new power supply Let say I want to run 2 , 3 or 4 5ch chips do i need a set of LDD's for each chip. So with the chip in op would be roughly 150w.To run 3 I would need a 450w with 15A and 37vTo run 4 I would need a 600w with 20A and 37vI know those power supplies may not be out there but...The big ? is do I need a set of 5 LDD's for each chip Link to comment
Horerczy Posted August 8, 2016 Share Posted August 8, 2016 At those voltages you would need 5 LDD per array. Link to comment
jacoviii Posted August 8, 2016 Author Share Posted August 8, 2016 o so if the voltag was lets say 10v - 15v i could use 1 set of 5 ldd's per 2 chips Link to comment
Horerczy Posted August 8, 2016 Share Posted August 8, 2016 Yes as long as there is enough supplied voltage. Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.