Oceanbox Designs Posted July 7, 2016 Share Posted July 7, 2016 Since we introduced our surface skimmers for the AquaClear HOB filters a few months ago, we have received many requests for other models. As demanded, today we bring you the AC50 version in addition to the AC70/AC110 version line up. It's time to steer clear of surface scums build up and make the best out of your AquaClear HOB filter. Drop-in Installation is as easy as it gets and hold firmly our enclosed 100% waterproof magnets system. Your beautiful fishes and corals will thank you! AC50 Surface Skimmer AC70 Surface Skimmer AC110 Surface Skimmer Link to comment
NewbReefer316 Posted July 15, 2016 Share Posted July 15, 2016 I see on the site where a ATO is recommended inside of the box to keep the filter from running dry, any input one one that will fit in the AC50 or 70 units? Link to comment
HarryPotter Posted July 15, 2016 Share Posted July 15, 2016 I see on the site where a ATO is recommended inside of the box to keep the filter from running dry, any input one one that will fit in the AC50 or 70 units? II believe he recommended the AutoAqua Smart ATO Micro Link to comment
Oceanbox Designs Posted July 15, 2016 Author Share Posted July 15, 2016 I see on the site where a ATO is recommended inside of the box to keep the filter from running dry, any input one one that will fit in the AC50 or 70 units? II believe he recommended the AutoAqua Smart ATO Micro He's correct! The Smart ATO Micro penny size sensor is a perfect fit inside the overflow box. Usually the float switch type mount of an ATO system is too big for this particular setup. These are awesome!!! Thank you Looking forward to seeing more of these being used in a full featured reef tank. Link to comment
JR! Posted November 13, 2016 Share Posted November 13, 2016 He's correct! The Smart ATO Micro penny size sensor is a perfect fit inside the overflow box. Usually the float switch type mount of an ATO system is too big for this particular setup. Thank you Looking forward to seeing more of these being used in a full featured reef tank. can the magnet for the sensor stay underwater? or is there another way to mount the sensor inside the overflow box? Link to comment
Oceanbox Designs Posted November 13, 2016 Author Share Posted November 13, 2016 can the magnet for the sensor stay underwater? or is there another way to mount the sensor inside the overflow box? Hey JR, I'm 99% sure it can or you can purchase one of my plastic sealed magnet. Link to comment
AdamNicholas Posted December 10, 2016 Share Posted December 10, 2016 Im new to the forum and just got the aquaclear 110 for my 8.6 gallon ADA 60f. I will be setting it up soon and would like one of the overflow boxes for it so i can surface skim but i believe the tank is only 7 or 8" tall. What are the dimensions for the overflow box? Is it too tall for the shallow depth of the ADA 60f? Link to comment
Oceanbox Designs Posted December 10, 2016 Author Share Posted December 10, 2016 Im new to the forum and just got the aquaclear 110 for my 8.6 gallon ADA 60f. I will be setting it up soon and would like one of the overflow boxes for it so i can surface skim but i believe the tank is only 7 or 8" tall. What are the dimensions for the overflow box? Is it too tall for the shallow depth of the ADA 60f? Welcome to Nano-Reef!! Glad you made it here, this is a very active reefing community! Our overflow box would be a perfect fit for that tank. It's about 5.25" tall. You're not going to be using any of the extra extension tubes, just the U-Tube so it will be a very clean install. Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.