Jump to content
Cultivated Reef

Help hanging hybrid quad!


Newstead

Recommended Posts

Please help the mechanically challenged ... I am planning to hang our nanobox quad/quad hybrid using 2 wall brackets., running the hanging cable from one wire loop on the fixture up through one bracket, over to the other, down and connected to the opposite wire loop. Sound or not?

In the below pics, have I connected the cable to the wire loop correctly? There is extra cable now running from the bottom left of the connector until I finalize it. Do I just ignore the screw thing on the fixture in between the wire loop attachment?

Thanks for any input.

 

.350l9qb.jpg

 

...xepzbl.jpg

Link to comment
DaveFason

You nailed it! I left the original grommet in there if you went that route. The new style that you have pictured however is 100x easier.

 

Now get this hung!

Please help the mechanically challenged ... I am planning to hang our nanobox quad/quad hybrid using 2 wall brackets., running the hanging cable from one wire loop on the fixture up through one bracket, over to the other, down and connected to the opposite wire loop. Sound or not?
In the below pics, have I connected the cable to the wire loop correctly? There is extra cable now running from the bottom left of the connector until I finalize it. Do I just ignore the screw thing on the fixture in between the wire loop attachment?
Thanks for any input.

.350l9qb.jpg

...

Link to comment

Archived

This topic is now archived and is closed to further replies.

  • Recommended Discussions

×
×
  • Create New...