Rpc07 Posted March 9, 2016 Share Posted March 9, 2016 So I was not happy with any of the mounting methods I found for the aquatic life 115 skimmer for chamber 1 of the biocube. Instead of giving up on it I decided to see if I could make it work. Here is my diy egg crate stand The stand measures 3.5 x 3.5 since that's all the first chamber will allow. It is just above 7 inches in height. The overall height with the skimmer ( measured to the top of the skimmer body not the cup ) is 14.5 inches. The base plate And all finished This stand is super solid and does not extend out any further then the skimmer since space is tight. Only thing left to do is adjust the skimmer height but with all my measuring I should be spot on. Hope this helps other people get this skimmer into chamber 1. Link to comment
Rpc07 Posted March 9, 2016 Author Share Posted March 9, 2016 Here it is installed everything fit like a glove. Up and running with the lid back on. And the lid closed Link to comment
Idaho ken Posted March 13, 2016 Share Posted March 13, 2016 Very awesome thread, much appreciated! Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.