rone_kevin66 Posted March 4, 2016 Share Posted March 4, 2016 Just wondering if I'm missing something with my setup. Have the razor controller setup and in the app no location has info on the moon. Also is their are way to get the night cycle to completely turn off after a set run time I really don't want Moon lights on all night. Do I need to set up a point based schedule to do this. Link to comment
jedimasterben Posted March 4, 2016 Share Posted March 4, 2016 No, the moon cycle goes through the entire night. As long as you don't run the intensity too high (moonlight is only for our enjoyment) then it's fine to run all night. Link to comment
rone_kevin66 Posted March 4, 2016 Author Share Posted March 4, 2016 Ok ya it Def is not high only 10% max. Probably will lower it to around 5%. I was just wondering bc I use to give full off for about 7 hrs and I could see the fish resting with a red light but tonight they were swimming when I work up this morning. Link to comment
jedimasterben Posted March 4, 2016 Share Posted March 4, 2016 I would take it to no more than ~3%. If you can see into the tank, it's really too bright. Link to comment
mpad Posted March 5, 2016 Share Posted March 5, 2016 A full off after a few hours of moon would be a nice feature though. Link to comment
rone_kevin66 Posted March 5, 2016 Author Share Posted March 5, 2016 A full off after a few hours of moon would be a nice feature though.Ya it would and I don't want to buy a timer just for that and my RKE is all full Link to comment
SpencerShepard Posted March 6, 2016 Share Posted March 6, 2016 There is something like this on the way. Just ignore the moon times for now. Link to comment
rone_kevin66 Posted March 7, 2016 Author Share Posted March 7, 2016 There is something like this on the way. Just ignore the moon times for now. sweet ☺ Link to comment
Johnic Posted March 12, 2016 Share Posted March 12, 2016 Following along. I agree, would be nice. Link to comment
JavaJacketOC Posted March 12, 2016 Share Posted March 12, 2016 Ya it would and I don't want to buy a timer just for that and my RKE is all full I ran a razor for a couple years and just set the blues at 1% intensity for 12 hours. If you want to have it completely off after the moonlight cycle you can use one of your time points to turn off whenever you want. Link to comment
701Superjet Posted March 17, 2016 Share Posted March 17, 2016 Does the BF automatically go through the full moon cycle in a month or does it do the same thing every night? Link to comment
jedimasterben Posted March 17, 2016 Share Posted March 17, 2016 Does the BF automatically go through the full moon cycle in a month or does it do the same thing every night? If you have lunar cycles enabled, it follows them, but if it is disabled, it just stays at what you set it at. Link to comment
Burtbanner Posted May 24, 2016 Share Posted May 24, 2016 A full off option would be awesome! As is I have to go into my night setting every night to turn full off from a moon like setting on my blue channel. Link to comment
Marc.The.Shark Posted July 8, 2016 Share Posted July 8, 2016 There is something like this on the way. Just ignore the moon times for now. Spencer, any progress on this? Would love to be able to shut it totally off after a few hours. Link to comment
flyfshrmn98 Posted December 19, 2016 Share Posted December 19, 2016 There is something like this on the way. Just ignore the moon times for now. Any word on when this will roll out? Link to comment
darryl hey Posted January 10, 2017 Share Posted January 10, 2017 There is something like this on the way. Just ignore the moon times for now. ahhh when? Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.