HOB Skimmer Extention Mod Question

[Themerchant]

I have a 24g Nano and want to add a protein skimmer. I want to keep the canopy since I just installed a Rapid Led conversion. I also have already converted my 2nd chamber into a mini refugium. Now I want to add a protein skimmer, so my choices are very limited due to my configuration choices. I know I can always run the skimmer in the front of the tank at night (HoF lol).

 

Would it be possible to modify the intake and return plumbing on the skimmer as long as I keep the correct height of the skimmer to water level. I want to extend 7 and 8 forward and possibly add some elbows to change the location where it enters the tank. Any inputs would be greatly appreciated.

I ordered a Eshoppes PSK-100H.

[evilc66]

Changing the length shouldn't make much difference. Adding elbows will, but you should be able to tune around it. Use 45 degree elbows wherever possible. They create less backpressure than 90's and will change the performance less.

[Themerchant]

Thanks. I think I might get a Hydro Nano or none at all. Currently just installed a upflow algae scrubber in the chamber. Thinking if I need a skimmer, will test my nitrates in a week to see.

If I went all out it would be chamber 1 intank basket, chamber 2 hydro skimmer, chamber 3 algae scrubber /return pump/ heater