Jiinx Posted February 10, 2016 Share Posted February 10, 2016 Hi there, Our router was 10 years old so we got a new router. A netgear one. My LEDs were working regardless of the new server - it was working on memory perhaps? I could not login, however, and change my settings. So I decided to re Blink Up. I tried at least 10 times to Blink Up but it kept saying Configuration wasn't successful and to check if I'm connected to WiFi. I am not sure what I'm doing wrong. I choose my WiFi from the options and typed in my password and clicked BlinkUp. Is there something that I'm missing? I unplugged both power supplies and tried again. I lost my "memory" settings so now it's just pitch black. It flashes three reds quickly and then a slightly longer red. I guess it's a WiFi issue? I'm not sure how to rectify it with the program though? thanks in advance for your help sarah Link to comment
SpencerShepard Posted February 10, 2016 Share Posted February 10, 2016 I've already responded by email, but here is some helpful info for others: http://www.nano-reef.com/topic/370409-bluefish-blinkup-and-connection-troubleshooting/ Link to comment
Nanofreak79 Posted February 11, 2016 Share Posted February 11, 2016 There must of been some change, my location has a big X and I can't do a new blink up getting an error message. This is the one annoyance I have with this light. Whenever someone wants to answer and fix this for me lmk. Link to comment
SpencerShepard Posted February 11, 2016 Share Posted February 11, 2016 There must of been some change, my location has a big X and I can't do a new blink up getting an error message. This is the one annoyance I have with this light. Whenever someone wants to answer and fix this for me lmk. No changes on our end. Please see this page: http://www.nano-reef.com/topic/370409-bluefish-blinkup-and-connection-troubleshooting/ If the problem persists after working through those steps, my contact info and the information needed from you is at the bottom of the post. Link to comment
DaveFason Posted February 11, 2016 Share Posted February 11, 2016 There must of been some change, my location has a big X and I can't do a new blink up getting an error message. This is the one annoyance I have with this light. Whenever someone wants to answer and fix this for me lmk. Jon, What is the error message? Can you go to the WIFI settings and re-do the Blink Up? -D Link to comment
Nanofreak79 Posted February 11, 2016 Share Posted February 11, 2016 Jon, What is the error message? Can you go to the WIFI settings and re-do the Blink Up? -D No, the blink up won't start. The error message is only shown for a millisecond, seriously. I can't even read it. Link to comment
DaveFason Posted February 11, 2016 Share Posted February 11, 2016 No, the blink up won't start. The error message is only shown for a millisecond, seriously. I can't even read it. I have never heard of this. Shoot me an email and CC Spencer. Want to help you out! Link to comment
Nanofreak79 Posted February 11, 2016 Share Posted February 11, 2016 Will do....kids go back to moms so I'll mess with it all tomorrow. Thank you. Oh and got my mini! I haven't find it up, kiddos taking up all my time now.lol. Is it dead pool ? Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.