Kool-cat Posted August 20, 2004 Share Posted August 20, 2004 I use two little fishes calcium. I think its okay. Some corraline growth. I drip 10 ml of a and b like every 4 days to a week. Link to comment
SBF Posted August 21, 2004 Share Posted August 21, 2004 i dont have a calcium test kit... do i have to have one for adding calcium, i plan on not over doing it, jsut adding a few drops a week Link to comment
xcajx Posted August 21, 2004 Share Posted August 21, 2004 I am using Kent's Liquid Reactor. About 2 weeks, not much of a diff yet, I will update in another 2 weeks if things change. Link to comment
EtOH_is_good Posted August 23, 2004 Share Posted August 23, 2004 xcajx, no diff in what? growth? ca levels? alk levels? shouldnt it change some measureable parameter? Link to comment
snostorm Posted August 26, 2004 Share Posted August 26, 2004 I was consistantly measuring Ca levels at around 340 and I picked up some kent liquid reacto. It didnt help my levels. I swithched to b-ionic and noe measure Ca at around 410. Link to comment
revance Posted August 26, 2004 Share Posted August 26, 2004 I have a 5.5g tank with a LOT of evaporation. I am worried that using kalk as topoff will over do it and cause a pH spike. Right now I use B-ionic but don't like having to sit there and drip it in manually. I think I am going to mix up a batch of kalk and drip it VERY slowly (not enough to top off) and see how it goes. Link to comment
CodeToad Posted September 4, 2004 Share Posted September 4, 2004 I use the 2 part 'Oceans Blend' in my 5.5 and I am very ahppy with it. I keep my CA and Alk dialed in as long as I test every few weeks to catch any changes in system demands. www.thelogicalreef.com sells the stuff, I got the big gallon jugs and they are going to last me a long time. At most I dose 5ml of each a day, so for about 30 bucks for a gallon of each, it will last me a LONG time. Link to comment
artooman Posted September 4, 2004 Share Posted September 4, 2004 I just use Kent Liquid Calcium and monitor with a test kit. I end up dosing twice the maximum dosing each day to keep my calcium levels up, so perhaps there is a better way. I did little research on calcium supps, so I am not sure that is a good way to go. I do have great coralline algae growth (light purple, deep purple, red, pink). Anyone else use Kent only? Should I be using something better? Link to comment
kappa Posted September 4, 2004 Share Posted September 4, 2004 I add 3 drops of salfert calcium after every time I change out 2 gallons of water. The level of calcium stays at 420-460, and drops slowly during the week. This seems to work for me for now. Alkalinity checks out well, and so does pH. Link to comment
danieljames Posted September 8, 2004 Share Posted September 8, 2004 bobbyb323...i've used the tropic marin as well for years with very good success imo. Its a balanced additive as well. Has never given me problems. Very good coraline growth, and keeps my Ca above 400. I currently use it on a 26 bow, with kalk used exclusively for makeup. I do think i will start using baking soda to raise my alk a bit though. Its testing right at 3 meq/l. I would prefer it a bit higher. Link to comment
Kelpie Posted September 17, 2004 Share Posted September 17, 2004 I wonder if you could put it in your topoff water in an automatic topoff system? Link to comment
SSMangrove Posted September 21, 2004 Share Posted September 21, 2004 I dose Kalkwasser using an airpump, floatswitch, and a one gallon bottle. It works well and i get so much evaporation due to all my fans and lights (20k 175w, 65w act, 2x19w daylite over 15g) that im able to dose about a gallon a day on a slow slow drip. Pump kicks off when water level rises to predetermined point via floatswitch. Total hands free top off and dosing! PM if interested in further instruction.. Link to comment
gregb Posted September 24, 2004 Share Posted September 24, 2004 I dose with Kalkwasser, it keeps my levels at 450 ppm. 3 good teaspoones to 3lt. Link to comment
Undertheradar Posted September 28, 2004 Share Posted September 28, 2004 I use a nano-sized calcium reactor. Link to comment
CodeToad Posted September 28, 2004 Share Posted September 28, 2004 Originally posted by Undertheradar I use a nano-sized calcium reactor. I think I speak for us all when i say PIX! Link to comment
ScottyDon't Posted September 28, 2004 Share Posted September 28, 2004 Originally posted by MrKrispy Salifert All-in-one is something I am working on testing. It is calcium acetate. It also includes strontium (not thrilled about) and amino acids. However, the big plus is you maintain calcium and alkalinity. You can increase amounts based on biological demand. It is expensive for larger tanks but the small $8 bottle should last most nano reefs 6-8 months. Where did you get this product? Link to comment
StephG Posted September 29, 2004 Share Posted September 29, 2004 I'd like to see that nano-sized calcium reactor also Link to comment
cdentii Posted September 30, 2004 Share Posted September 30, 2004 I would also LOVE to see that nano-sized Reactor, I have also been thinking about A DIY reactor, Any thoughts, tips, PICS, ect.... Link to comment
Undertheradar Posted September 30, 2004 Share Posted September 30, 2004 http://www.myreefcreations.com/canano.htm Link to comment
MrKrispy Posted September 30, 2004 Share Posted September 30, 2004 ScottyDon't: I got it at Custom Aquatics Link to comment
coralfarm'n Posted October 10, 2004 Share Posted October 10, 2004 I know this is untraditional but, I sent a sample of my well water off to my state lab to be tested before I decided to go RO/DI or not for top off I chose not to Hardness as CaCO3(Ca,Mg) 37mg/l Alkalinity 0 mg/l Other than that and 2-3 time weekly Pickle lime slurrys in the morning when the ph is lowest & zero water changes,nothing. Everything fairs great note:this is on my very large system that evaporates 5-7 gal per day.I have just recently set up my nano system that consists of a 10 gal with a drilled 10gal above it as a fuge and have yet to get into habit with its Calcium replacment , I was thinking of mabey 1/2 doses of B-ionic as well as mabey Aragamilk in 1/4 to 1/2 dosages. but for now same as above just less water added and once weekly kalk slurry so far so good Link to comment
DitchPlains Posted October 12, 2004 Share Posted October 12, 2004 Well as long as we're testing, I only test for calk, alk, and Storntium, that being said, I top off with distilled water premixed with Iodine, Iodide, Strontium, and Calk. I use recommend amounts, and the idoide and iodine I do every other top off jug so not to overdose. My xenia love me, and look like dandelions in summer, there everywhere!! My calk is over 340 with my Hagen test kit. so everything is doing ok, I try to just go by works, if I swithc or change my system around too much, it gets dicey, but the ocean is stable so best to stick with what works, and this works for me. I try to do weekly 1 gallon water changes. I also though which will frek everyone out have a DSB in my nano....its 5-6 inches all around. I think that along with simmer seems to keep things in check, and dosing helps keep the corals flourishing. cool thread by the way sorry I'm long winded. Link to comment
kappa Posted October 15, 2004 Share Posted October 15, 2004 I have a few corals in my tank, such as two Monticaps, a Goniopora, and also a maxima clam that require some dosing of calcium. I dose only twice a week with Salifert Calcium with alot of success keeping the calcium levels around 400-460. After the 2 gallon water change to my 12g nano cube, I shake up the Salifert calcium bottle, which leaks btw : (, and add 4-5 drops, that is equivilent to less than 1ml. Then 4 days later I add 2 more drops. All other levels, such as Alkalinity, dkH, pH are very good, and stable. I use Instant Ocean salt : P Link to comment
knowse Posted October 22, 2004 Share Posted October 22, 2004 Originally posted by SDA619 i read alot about this preparing ur own mix with pickling lime and vinegar... can someone actually go into detail how to mix it and how much to dose how often per let say 10gal. Not sure if any one answered this, I make a gallon of kalk at a time. You will need 2 - 1 gallon containers 1 gal. ro/di or distilled water 1 tablespoon distilled white vinigar 5% acidity, 1 teaspoon pickling lime Mix well and let set over night. (may need additional mixing and resting time) I mix 1 cup of kalk to 1 gal. ro/di or distilled water. Top off as needed If cal. tests are not up high enough just add more kalk to water, if to high add less. Pretty simple. or use kalk mix straight in drip. Link to comment
GUSGUS 16 Posted November 15, 2004 Share Posted November 15, 2004 for a nano 50% or less, weekly, how do you know how to balance the rest of the soup , and will you keep this up . Quote . 2old soon 2 late smart. Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.