tkao Posted February 4, 2016 Share Posted February 4, 2016 Does anybody have any suggestions for a pump upgrade other than a minijet 606? Quote Link to comment
FlamingPrawn Posted February 5, 2016 Share Posted February 5, 2016 I'm using a Hydor 200 on my Cadlights 4gallon... idk how it'll fit with the Spec but it is a good amount of flow Quote Link to comment
scottmckinney67 Posted February 6, 2016 Share Posted February 6, 2016 aqueon aq600 fits. Pull cover off, use a file on a nub and it drops right in. http://www.amazon.com/Aqueon-Quietflow-Submersible-Aquarium-Utility/dp/B008F40LFC 3 Quote Link to comment
StevieT Posted February 6, 2016 Share Posted February 6, 2016 aqueon aq600 fits. Pull cover off, use a file on a nub and it drops right in. saweeet. Looks just like the mini jet 606 with a different knob. If made in Italy it comes out of the same factory. The Mini Jet 606 still exits under a different name, just at a 220 volt configuration. Still working to bring that here to the USA at 110 volts. 4 Quote Link to comment
makingfilms Posted February 6, 2016 Share Posted February 6, 2016 Doesn't the hydor 180 fit in the back Quote Link to comment
Aaronskates92 Posted February 7, 2016 Share Posted February 7, 2016 Aqueon aq600 pull the covers off and file the little nipple thing down Quote Link to comment
scottmckinney67 Posted February 7, 2016 Share Posted February 7, 2016 I've got a small hydor, it will fit but it's a pain. Trust me, get the aqueon, it literally drops right in, and more importantly, pulls right out... Quote Link to comment
Indiana Reefin Posted February 11, 2016 Share Posted February 11, 2016 What nub are you talking about with the aqueon aq600? Quote Link to comment
scottmckinney67 Posted February 11, 2016 Share Posted February 11, 2016 What nub are you talking about with the aqueon aq600? Just a plastic nub on side that's covered. Trust me, the thing fits... Quote Link to comment
StevieT Posted February 15, 2016 Share Posted February 15, 2016 Fits, do this: Remove front cover and pop off flow dial. Using a razor blade remove the half moon piece Remove rear black plastic cover Install pump 1 Quote Link to comment
makingfilms Posted February 18, 2016 Share Posted February 18, 2016 Ok so I did this mod this weekend and now the overflow section is significantly drained to where it is making a bunch of noise should I fill with more water to compensate for higher flow. I have a in tank skimmer and basket in my spec. Just afraid about a power outage. Quote Link to comment
StevieT Posted February 18, 2016 Share Posted February 18, 2016 Ok so I did this mod this weekend and now the overflow section is significantly drained to where it is making a bunch of noise should I fill with more water to compensate for higher flow. I have a in tank skimmer and basket in my spec. Just afraid about a power outage. yes add new water to the pump chamber Quote Link to comment
Normfree89 Posted January 31, 2017 Share Posted January 31, 2017 I know this is kind of old but I'd be thankful if someone answered my questions. So I've been running the aqueon 600 for a week now and it is pretty loud compared to the fluval pump. I've tried putting vaseline on it and putting sponge under it to reduce sound. Is this how your aqueon pumps are or am I just being impatient and not allowing it to break in? Also if this continues, does anyone know if the eheim compact 600 pump will fit? It's 1.36 x 2.15 x 2.03 inches and also 160 gph but I have not seen anyone use it or mention it. Thanks Quote Link to comment
urfavoritehoboinkc Posted February 1, 2017 Share Posted February 1, 2017 In the grand scheme of tank noise my air whisper 10 for my protein skimmer is louder then the aqueon 600. I'm also running a rio 200 for a hob refugium along with a wave making pump. So just a single aqueon is almost nothing compared to the hum I'm producing with all that. Quote Link to comment
MisturrTinnie Posted January 22, 2022 Share Posted January 22, 2022 On 1/31/2017 at 5:33 PM, Normfree89 said: I know this is kind of old but I'd be thankful if someone answered my questions. So I've been running the aqueon 600 for a week now and it is pretty loud compared to the fluval pump. I've tried putting vaseline on it and putting sponge under it to reduce sound. Is this how your aqueon pumps are or am I just being impatient and not allowing it to break in? Also if this continues, does anyone know if the eheim compact 600 pump will fit? It's 1.36 x 2.15 x 2.03 inches and also 160 gph but I have not seen anyone use it or mention it. Thanks Would love to know the answer to this also, I prefer to have an eheim instead of an aqueon. Quote Link to comment
ReefTaco Posted January 22, 2022 Share Posted January 22, 2022 Newa mini 606 is a great pump that is very quiet and pumps at 159gph. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.