cloran Posted July 21, 2015 Share Posted July 21, 2015 What would be a good pump to replace the stock one with? I changed the output a little and have it going into a line-loc 1/2" Y. So I'm wanting a little more flow. Since i bought the cube used, I have no idea what the stock pump output is Link to comment
Gramps13 Posted July 21, 2015 Share Posted July 21, 2015 I will have to look at my stock pump when I get home from work to see what the original GPH is. I just recently replaced mine with a MJ1200 that I had from a spare media reactor. Link to comment
cloran Posted July 22, 2015 Author Share Posted July 22, 2015 How did that go? Are you running a skimmer? If so, which one? Link to comment
Exodus Posted July 23, 2015 Share Posted July 23, 2015 MJ 1200 is Waaayyyy too much flow if you have an additional powerhead in a 12G (I tried in my Aquapod 12(Same thing) I used Maxijet 600 (closest to the stock) but also had an MP10 turned very low. Otherwise if using something like a Koralia nano I would think the 900 would give decent flow. Also be sure to make the investment into the Cobalt pump you won't regret it. Link to comment
cloran Posted July 24, 2015 Author Share Posted July 24, 2015 Which skimmer are you running? Link to comment
Gramps13 Posted July 26, 2015 Share Posted July 26, 2015 I'm not running a skimmer yet. I was looking at the nano skimmer from JBJ though. Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.