Jump to content
ReefCleaners.org

Surprise Attack! Trying Something New!


Marc.The.Shark

Recommended Posts

Marc.The.Shark

FTS 04/22/2017

IMG_1059.thumb.JPG.b0d91f6da15ba319617cf923bc210d00.JPG

 

FTS 07/17/2016.....awaiting the water of life!

image_14.jpeg

 

*Tank

 

 

 

 

 

 

 

 

- Custom local built 36" x 12" x 10"; 3/8" Starphire glass 4 sides. (approx. 20g)

- Dual 1" Bulheads w/strainers down to dual Reverse Durso's in the sump (gate valve on 1)

- Dual 1/2" CPVC over the rim returns/split by 3/4" SCWD

- ReefCleaners Dry Rock & Old Dry Rock I had

- Tropic Eden Meso-Flakes

- Custom Screen Cover

*Lighting

 

 

 

 

 

 

 

 

- Custom made acrylic 32" (30" heatsink) LED

- 4 NanoBox V3 arrays (4 channel)

- Bluefish control

*Sump/Equipment

 

 

 

 

 

 

 

 

- 10g standard tank w/Oceanbox Designs Sump Kit (3 chamber)

- Coral Comulsion par30

- LED interior cabinet lighting actived by switch on left door

- Tunze 9001 Skimmer

- IM MiniMax Reactor

- 150w Finnex Titanium Heater

- Jebao DCT8000 DC pump w/Georg Fischer 3/4" Wye check valve

- Marine Color 3 channel dosing pump w/custom dosing containers

- Oceanbox Designs custom ATO container (approx. 4gal) w/Smart ATO Micro

- Apex Classic Full version w/PM2

 

 

 

 

 

Starting a new build, custom 36" x 12" x 10" tank, 3/8" Starphire glass, approx 20 gal.....

 

Step 1, stand.

Found this on Craigslist for $15. Solid Oak. 37.5" wide, hmmmm, wonder what kind of tank will fit?!

 

image.jpg1_1.jpg

 

After a few coats of stain and some new hardware.......

 

image.jpg4.jpg

 

Dismantled the drawer & made this shelf to hold Apex display, modules, powerbar, etc. Also painted trim on sump white, u can see in the background.

 

image.jpg9.jpg

 

Painted inside of stand white and installed drop down hinges on the old drawer front to access Apex stuffs

 

image.jpg7.jpg

 

 

"Blood In The Water"

Test fitted Mr Reefer Ruby Red sump kit, nice!!

 

image.jpg2.jpg

 

Teaser......

Have 3 NanoBox V3 arrays in the mail from Dave to add to the one I already have. WoW!! I smell a bad ass light build coming.

 

Stay tuned, not gonna want to miss this one.......

  • Like 18
Link to comment

Nice build so far...following :)

 

Make sure the shorter part of the 1st baffle face the bottom and the last baffle is 5/8" ~3/4" from the 3rd baffle, it increases flow to the return chamber.

  • Like 2
Link to comment
Marc.The.Shark

OMG good luck!

Thanks Harry

 

 

Nice build so far...following :)

 

Make sure the shorter part of the 1st baffle face the bottom and the last baffle is 5/8" ~3/4" from the 3rd baffle, it increases flow to the return chamber.

Will do, thanks for the tip. Gonna be awhile before I glue them in, might need a larger return pump :)

  • Like 1
Link to comment
Marc.The.Shark

Following, love what you did with the stand, looks 100x better now.

Thanx, keeping my eye on your light build as well, I love those CNC Reef fixtures. Got a few surprises for mine, gotta find my tank 1st tho! Lol

  • Like 1
Link to comment
Marc.The.Shark

Ordered my tank today. Local builder, 36" x 12.5" x 10.5" Starphire 3/8" glass. Drilled for two 1" overflows 1/8" from rim, back center. Here is a mockup of the returns, 4 total, split into two by a SCWD. The pic shows projected flow from A & then B returns alternating. Definately need a bigger return pump! On the hunt. I was told 2 weeks for the aquarium. Any critiques of this plan welcomed.

 

post-12858-0-81068800-1437092629_thumb.jpg

Link to comment
HarryPotter

Ordered my tank today. Local builder, 36" x 12.5" x 10.5" Starphire 3/8" glass. Drilled for two 1" overflows 1/8" from rim, back center. Here is a mockup of the returns, 4 total, split into two by a SCWD. The pic shows projected flow from A & then B returns alternating. Definately need a bigger return pump! On the hunt. I was told 2 weeks for the aquarium. Any critiques of this plan welcomed.

attachicon.gifimage.jpg

Hell yeah! I can't wait to see what you do with this :)

 

I hope you get two MP10s; one on either side, that would be pretty sick (but $$ :( )

Link to comment
Marc.The.Shark

Hell yeah! I can't wait to see what you do with this :)

I hope you get two MP10s; one on either side, that would be pretty sick (but $$ :( )

Trying to do without that, hopefully I can get enuf random flow with the 4 returns. But if you woulda sold me the one you had, then I'd only need 1 more, right? You're a tease Harry!

  • Like 3
Link to comment
HarryPotter

Trying to do without that, hopefully I can get enuf random flow with the 4 returns. But if you woulda sold me the one you had, then I'd only need 1 more, right? You're a tease Harry!

Eek so I don't like using the MP10wQD since it pisses off my open brain and anemone... We'll talk haha. For now I'm not buying/selling anything, but when I start we'll see.

Link to comment
Marc.The.Shark

Received most of the parts for my Custom, One-Of-A-Kind, LED light featuring 4, count 'em, 4 of Dave's V3 arrays & controlled by the one and only BlueFish! Need to order a couple fans yet, but have some work ahead of me with this stuff! Tank's probably a week or so out, but I'm in no hurry to get that (yeah, right!!) I know it doesn't look like much now, but just you wait.................,post-12858-0-27524800-1437612293_thumb.jpg

  • Like 5
Link to comment

I can't wait until you get the tank! And with 3 returns, you will certainly have enough flow in the tank if you choose the right pump/pumps. Just my two returns with spinners creates plenty of flow, but I am pushing 400-600GPH out of each. I need to figure out how to post up a video sometime. Also the changes you made on that stand, looks fantastic compared to before.

Link to comment
Marc.The.Shark

I can't wait until you get the tank! And with 3 returns, you will certainly have enough flow in the tank if you choose the right pump/pumps. Just my two returns with spinners creates plenty of flow, but I am pushing 400-600GPH out of each. I need to figure out how to post up a video sometime. Also the changes you made on that stand, looks fantastic compared to before.

Nice. I'm shooting for around 500gph out of each dual return at a time, so based on your info, I think the Jebao DCT6000 ought to do it. That would switch the SCWD about every 10 seconds or so. Are you pretty quiet with just the screens & elbows on the overflows? Still debating on running a box out back with full syphon & emergency overflow. Maybe I'll try it with just the elbows 1st.

Link to comment
Marc.The.Shark

Great job on the stand, looking forward to following along on your build

Sweet stand setup

Very very nice. Good design eye.

Thanks guys. Appreciate it.

 

Working on the light, got the heatsink drilled & tapped. Changed the design up slightly so disassembly would be easier and had to order a couple small pieces of acrylic. Trying not to build myself in a corner in case one of Dave's crappy V3 boards dies on me! LOL :) JK Dave!! Ha. Also tring to figure the best way to control the fans with the Bluefish. I suppose I could order the breakout board from Spencer, but it's like $45 shipped, seems like a lot to turn a couple fans on & off. Guess I could just use my Apex to do it. If anyone has any suggestions, I'd appreciate it. I don't need to temperature control them or anything, but would like to run them lower speed than max to help on noise. Got some decent ones, but just in case.

Link to comment

Nice. I'm shooting for around 500gph out of each dual return at a time, so based on your info, I think the Jebao DCT6000 ought to do it. That would switch the SCWD about every 10 seconds or so. Are you pretty quiet with just the screens & elbows on the overflows? Still debating on running a box out back with full syphon & emergency overflow. Maybe I'll try it with just the elbows 1st.

I have no siphon running, I had to drill into the elbows and insert some piping the size of air tubing in about 6 inches, sticking out about 1cm. This removed all gurgling noises. All the noise now is coming from where the bubbling and water enters the sump. It certainly gets quieter as the flow is reduced, but it difficult to remove the sound completely. I have the drains submerged about an inch to. I can't imagine the noise if they weren't. But I might attempt a few other things to remove these sounds as well. But overall I like the noise of running water, so I am please.

Link to comment
Marc.The.Shark

Yeah, my current standpipe runs like that, I run the airline all the way down into the sump (or close to it) & then have a T about half submerged at water level to let air escape with the other end about an inch or so under the water level. Cant hear it at all with the door closed. I can take a pic for u if you want to try that.

Link to comment

Yeah, my current standpipe runs like that, I run the airline all the way down into the sump (or close to it) & then have a T about half submerged at water level to let air escape with the other end about an inch or so under the water level. Cant hear it at all with the door closed. I can take a pic for u if you want to try that.

A picture would be great. I will certainly give it a try.

Link to comment
Nanofreak79

Some sweet red and clear acrylic dosing containers and a red acrylic ato.....I always get the sump in and then realize there's no room for either in the stand;)

Following!

  • Like 2
Link to comment
Marc.The.Shark

Some sweet red and clear acrylic dosing containers and a red acrylic ato.....I always get the sump in and then realize there's no room for either in the stand;)Following!

Good call! You mean like this?

post-12858-0-38649100-1437919149_thumb.jpg

 

Already got my eye on them! Lol. Pretty decent price on Amazon.

Yeah, I went with just a 10gal sump so I would have extra room. My current setup is jam packed, it's definately a PITA, I feel your pain.

  • Like 1
Link to comment

Received most of the parts for my Custom, One-Of-A-Kind, LED light featuring 4, count 'em, 4 of Dave's V3 arrays & controlled by the one and only BlueFish! Need to order a couple fans yet, but have some work ahead of me with this stuff! Tank's probably a week or so out, but I'm in no hurry to get that (yeah, right!!) I know it doesn't look like much now, but just you wait.................,attachicon.gifimage.jpg

Very nice, can't wait to see you put this together. I bought parts to do one but never get around to it :(

  • Like 1
Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recommended Discussions

×
×
  • Create New...