sprite Posted May 26, 2015 Share Posted May 26, 2015 What's my options for diy over a 20L and what LEDs would you use? Led newbie here but I can solder and wire Link to comment
HarryPotter Posted May 26, 2015 Share Posted May 26, 2015 3w CREE LEDS Check out StevesLEDs and RapidLED Link to comment
Horerczy Posted May 26, 2015 Share Posted May 26, 2015 There's more out there than Cree. Quite a bit is better too. Like Phillips Lumileds. I'm unfamiliar with that particular unit though. Link to comment
sprite Posted May 26, 2015 Author Share Posted May 26, 2015 What ratio of LEDs would you use and what colors? I have no idea when choosing LEDs even though I've read about them Link to comment
evilc66 Posted May 27, 2015 Share Posted May 27, 2015 You don't want to use that controller for a high power LED setup. That one is designed for strips like Ecoxotic Panorama or Stunner strips where dimming is done by pwm through the supply voltage (12v or 24v) for the strip. This is not how a good high power led setup is controlled. High power LED drivers are controlled via a 0-10v analog signal, 5v pwm, or 10v pwm. Link to comment
sprite Posted May 27, 2015 Author Share Posted May 27, 2015 I guess I'll stay mh then.. Thanks Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.