clink51 Posted April 22, 2015 Share Posted April 22, 2015 I purchased a sump that came with the 57g i'm slowly building. I just now got around to start playing with the tank and would like to add a place for a refugium. Any ideas on how i should modify this? I have already cut a piece of glass for the baffle that seperates the drain and skimmer area from the fuge ( 9" tall), and as you can see in the below picture, their are 2 plastic baffles already there but mighty low (first baffle is 5"). As it stands right now, if i were to leave it as it, i would only have a 1.9g refugium, which i feel is way to small to do anything. Any ideas would be grand here is one idea im playing with but i'll need more glass Link to comment
cromag27 Posted April 22, 2015 Share Posted April 22, 2015 You don't want the baffles too tall otherwise it will overflow if the power goes out. I would also do a 3 baffle bubble trap before the return pump. Link to comment
clink51 Posted April 22, 2015 Author Share Posted April 22, 2015 i 100% agree. thats why my tallest baffle will be 9 inches. The tape is not proportionate, just for compartment spacing Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.