Jump to content
Top Shelf Aquatics

FS: ADA-30C w/ Glass-holes overflow


mclayj

Recommended Posts

Finished packing up my apartment for my move in a few weeks and have a few items that I am looking to sell (or put in storage) before I move in a few weeks.

 

1) Aquabox 30" x 18" x 8" frag tank - $380 shipped SOLD

Never used other than to leak test. Can be used as either an AIO or drilled for sump. Frag section is 25" x 18" x 8" with window and overflow section is 5" x 18" x 8". Includes two 8"x8" frag racks

 

2) Micro-reefs 1.5G system with top, filter, heater & light - $50 shipped SOLD

11"L x 6"W x 7"H. Never used other than to leak test.

 

3) ADA-30C with Glass-holes Nano Overflow and Return - $140 shipped

Never used other than to leak test.

 

IMG_0696_zpszztug2rj.jpg

 

IMG_0697_zpschbesevu.jpg

 

4) Building An Obsession 16" Cube Sump - $240 shipped SOLD

Never used other than to leak test. All information on the compartment dimensions, etc. can be found here: http://buildinganobsession.com/products/cube-sump

 

Let me know if you have any questions.

Link to comment

frag tank is pretty D*** neat !! also have always been intrigued by the Micro-reef 1.5G ! B)

Yea I was in the process of setting up a full SPS setup with 50G Reef Savvy display, 34" Synergy Reef sump and then this frag tank when I found out I would moving across the pond for 1-2 years. The display and sump are going in storage until I return but figured I'd give someone a chance at the frag tank so it's not sitting in storage as well

Link to comment

Cool thanks. It's a lot smaller than it looks. Idk how to find a stand small enought that I could fit a sump underneath since its drilled.

Link to comment

Cool thanks. It's a lot smaller than it looks. Idk how to find a stand small enought that I could fit a sump underneath since its drilled.

Ask and you shall receive hahah, someone on this forum made an amazing stand for the sump and everything. Give it a look see, I had ADA-30c and i can tell you it is a beautiful piece of work. add a nanobox tide and you are SET!

 

http://www.nano-reef.com/topic/325088-nanotopias-ada-30c-flir/

Link to comment

Cool thanks. It's a lot smaller than it looks. Idk how to find a stand small enought that I could fit a sump underneath since its drilled.

I was originally intending to build a 18" x 18" stand with the BAO sump underneath and ADA-30C on top (way overkill I know). I may still do that if these are not gone by the time I move in a few weeks. Another tank that uses a 12" cube with sump underneath is this one:

 

http://www.nano-reef.com/topic/323911-justins-mixed-9g/

Link to comment

Archived

This topic is now archived and is closed to further replies.

  • Recommended Discussions

×
×
  • Create New...