onefang Posted April 18, 2015 Share Posted April 18, 2015 I have a quick question, mainly just to see if there is anyone out there who has run an AC50 as pictured on the inTank site (with a neotherm in the first chamber). I really don't want a heater in my display, and it seems like it fits nicely in there. The water comes up about a third of the way on the temp dial, but there isn't a minimum water line on the heater so I am not sure if it needs to be submerged further. I couldn't find anyone via search who was running this config - any thoughts, experiences? The top portion of the heater doesn't seem to be producing any heat, but I wonder if the thermostat may be up higher and not submerged? Link to comment
onefang Posted April 18, 2015 Author Share Posted April 18, 2015 aw crap.. I think I just answered my own question. BRS's description for the heater: Minimum water level - Top of the bezel. Link to comment
malady Posted April 21, 2015 Share Posted April 21, 2015 I ran one for a few months never had a issue Link to comment
onefang Posted April 21, 2015 Author Share Posted April 21, 2015 Yeah.. since I posted this thread, I've found a couple threads on other forums showing how these things can explode when not properly submerged. That and I had a stealth heater pop on me violently, so I will just put up with it being in the display for now just to be safe. Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.