thehammer1985 Posted February 25, 2015 Share Posted February 25, 2015 I had a couple questions. 1 what size wire should I use in between the power supply and the drivers. 2. I have a 180 watt 3.75 amp power supply will this run 4 ldd 1000h drivers and 2 ldd 700h drivers with 26 leds or is it not enough amps. 3. The leds s ent have writing on the back for the color do I need to clean this off or is it ok. Thank you Link to comment
Mojado Posted February 25, 2015 Share Posted February 25, 2015 Wire should be sized to handle the maximum current of the source. Look at the "Maximum amps for power transmission" column in this chart. http://www.powerstream.com/Wire_Size.htm Link to comment
farkwar Posted February 25, 2015 Share Posted February 25, 2015 Thanks for the link. Bookmarked. Link to comment
Mojado Posted February 25, 2015 Share Posted February 25, 2015 Thanks for the link. Bookmarked. Those numbers seen kinda low. These are better. http://www.engineeringtoolbox.com/wire-gauges-d_419.html Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.