Jump to content
Coral Vue Hydros

Deadeye's 3 Gallon Picotope Build


Deadeye

Recommended Posts

ooFxjEN.jpg

 

I want to thank kylhckly and dingusplease for all the help. They each answered probably 20+ questions of mine helping me with this setup.

 

Equipment:

-Picotope 3 gallon tank
-AC50 with chaeto and stock pico light on at night (Nothing but chaeto in the filter)
-Hydor 50watt heater
-Maxspect Nano Razor LED (Right now it comes on about 9;15am and goes until about 9pm, but I only have it going to about 45% on blue lights and 35% on white at its peak. Not quite sure how I should have the lighting setup yet)
-Smart ATO (runs for about a week before refiling reservoir, which is a Bubba Keg)

Parameters:
-Temp: 78-80, took me a while to get it down from 80, the heater had to be set to 73 to operate correctly.
-SG: sits right at 1.024 to 1.025 with little fluctuation

-Tank cycled and nitrates seem to be under 5-10ppm according to a API test

 

-4lbs of LR

-5 Zoa frags

 

Currently, as you can see I am having problems with my Maxspect Nano suspension hanging kit. The screws are too wide, so for now I used zip ties. I am e-mailing back-and-forth with CoralVue hoping they will send me the right screws. Unfortunately, they just told me to try to force them in. I feel like I paid for their hanging kit, they should hold up to providing me with the right screws. We will see what happens.

Link to comment

Archived

This topic is now archived and is closed to further replies.

  • Recommended Discussions

×
×
  • Create New...