Jump to content
SaltCritters.com

Jurassic Gel


farkwar

Recommended Posts

Fwiw, if I would have seen this before I put my scape together I would have tried it. Not that I don't like jb water weld, because it works really well but, not having to mix a 2 part and also this stuff is clear so that's a plus.

 

Fwiw, if I would have seen this before I put my scape together I would have tried it. Not that I don't like jb water weld, because it works really well but, not having to mix a 2 part and also this stuff is clear so that's a plus.

 

Right so, its super early and idk why it posted it twice. I have no idea how to edit a post on my phone.

Link to comment
  • 2 weeks later...
jedimasterben

Are you scaping dry or wet?

 

This stuff is amazing, if you are able to put everything together dry: http://www.marcorocks.com/aquascape-supplies/e-marco-400/

And actually, you can use it with wet live rock, too. Just pull the rock out, apply like normal (spray with Acryl-60/water mixture, then apply mixed Emaco/Acryl-60/water, apply to joints), and then wait. 20 minutes for the initial cure, then leave it out for another 20-40 minutes for it to really set, then place back into water. Cover the rocks with paper towels or keep spraying with saltwater in a spray bottle, taking care not to really spray the Emaco joints too much.

Link to comment

Are you scaping dry or wet?

 

This stuff is amazing, if you are able to put everything together dry: http://www.marcorocks.com/aquascape-supplies/e-marco-400/

 

I'm going to be scaping wet live rock and wet reef cleaners rock out of water.

 

Ill be drilling and threading with nylon threaded rod.

 

The glues will be used like mortar and filler between rocks to increase hold power and rigidity.

Link to comment

Archived

This topic is now archived and is closed to further replies.

  • Recommended Discussions

×
×
  • Create New...