HM3105 Posted December 21, 2014 Share Posted December 21, 2014 If I've got a tank that is 60"x24"x12" (lwh) and is made of 3/8 untempered, would it be safe to put two 1 1/2" holes in one of side (24") for an overflow? Link to comment
cju84 Posted December 22, 2014 Share Posted December 22, 2014 "how many holes can I safely drill" Link to comment
Scorched Posted December 22, 2014 Share Posted December 22, 2014 Oh ya, you could even put 3-4 1.5" holes along the 12" side if you were careful and spaced them 1.5" apart. You can also drill fairly close to the rim or edge as long as you are 1/2 the size of the hole away from the edge. So you could have the top of your 1.5" hole 3/4" from the rim. If its a 2" hole it should be 1" away from an edge. Link to comment
NorthGaHillbilly Posted December 22, 2014 Share Posted December 22, 2014 Shouldn't have any problem. Ghost style overflow? Link to comment
Nightstar Posted December 25, 2014 Share Posted December 25, 2014 You pose a geometry question. Project triangles to answer. Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.