Jump to content
Top Shelf Aquatics

LED DIY array input?


sirruckus

Recommended Posts

Hello everyone,

 

I've read some guides about the LED arrangements from LED group buy - and tried applying what I observed onto my set up. Attached should be a drawing of the LED arrangement (the same arrangement in 5 locations).

 

anyone with experience able to confirm if the layout look acceptable? heat sink is 9" wide x 4'-6" long

Link to comment

Nope, would not do that.

 

Get good tight array pucks instead.

 

Nano Box 13up puck are only $60

RLL 12 up pucks are $75.

Radion Gen3 pucks are $75

Radion Gen3 Pro pucks are $125

 

With the LEDs in tight array, and then the pucks tight in a line, you get a very diffused light for LED, with no apparent disco, separation, or color banding.

 

4 foot long, I would use 6 to 8 pucks. You could even alternate pucks if you like, Vertex does that, and its a very good coloration and diffusion.

Link to comment

Archived

This topic is now archived and is closed to further replies.

  • Recommended Discussions

×
×
  • Create New...