Fissure Posted August 29, 2014 Share Posted August 29, 2014 Hi there, was originally planning on getting a premade LED fixture but since then have changed my mind and will be building my own instead. I will be using your controller and I am now wondering what would be the best way to group the leds? I plan on utilizing the most of your controller. Will be listing the leds i plan to use and how I as of know planned to channel them. The Leds will be places in 10 clusters evenly spread across the width of the tank. 1x Cool White - Channel 1 1x Warm White - Channel 1 2x Cool Blue - Channel 2 2x Deep red - Channel 3 1x Cyan - Channel 4 1x Lime - Channel 5 1x Violet 405nm - Channel 6 1x Violet 435nm - Channel 6 Is there any better way to hook this up or does that look ok? Best regards //John Link to comment
1morok Posted September 4, 2015 Share Posted September 4, 2015 Hi, I am new here.. My name is Miro, I am from slovakia, europe. Can somebody post color groups which work fine? I would like to drive all 6 channels on my BF.mini with different colors Many thanks Link to comment
jedimasterben Posted September 4, 2015 Share Posted September 4, 2015 Hi, I am new here.. My name is Miro, I am from slovakia, europe. Can somebody post color groups which work fine? I would like to drive all 6 channels on my BF.mini with different colors Many thanks Best to look back through the threads here and see if you can find the data you need, if not, then make a new thread and give as much data about your light you have made as you can. Link to comment
1morok Posted September 5, 2015 Share Posted September 5, 2015 Thanks, but nothing found, olny this tread.. just post common setup.. Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.