Jump to content
Premium Aquatics Aquarium Supplies

Best way to group the LEDs for a DIY LED ramp?


Fissure

Recommended Posts

Hi there, was originally planning on getting a premade LED fixture but since then have changed my mind and will be building my own instead.

 

I will be using your controller and I am now wondering what would be the best way to group the leds?

 

I plan on utilizing the most of your controller. Will be listing the leds i plan to use and how I as of know planned to channel them.

The Leds will be places in 10 clusters evenly spread across the width of the tank.

 

1x Cool White - Channel 1

1x Warm White - Channel 1

 

2x Cool Blue - Channel 2

2x Deep red - Channel 3

1x Cyan - Channel 4

1x Lime - Channel 5

 

1x Violet 405nm - Channel 6

1x Violet 435nm - Channel 6

 

Is there any better way to hook this up or does that look ok?

 

Best regards

//John

Link to comment
  • 1 year later...

Hi, I am new here..

My name is Miro, I am from slovakia, europe.

Can somebody post color groups which work fine?

I would like to drive all 6 channels on my BF.mini with different colors

Many thanks

Link to comment
jedimasterben

Hi, I am new here..

My name is Miro, I am from slovakia, europe.

Can somebody post color groups which work fine?

I would like to drive all 6 channels on my BF.mini with different colors

Many thanks

Best to look back through the threads here and see if you can find the data you need, if not, then make a new thread and give as much data about your light you have made as you can.

Link to comment

Archived

This topic is now archived and is closed to further replies.

  • Recommended Discussions

×
×
  • Create New...