Jump to content
inTank Media Baskets

Biocube cleaning


Kevin69

Recommended Posts

Thanks but I have that one....doesn't really get into the curved corner much.maybe a razor blade will do but I'm scared of scratching the glass

Link to comment

Been using a razor blade on my biocube for 7 years now without scratching. I do not use the razor that often, but when I do it is always a new blade and held on a shallow angle against the glass. The only scratches I have are from when I used a mag float and got sand caught under it.

Link to comment
arcticwolf1969

 

Two Little Fishies NanoMag Magnetic Cleaner , has a thin inner pad that shapes itself to the curves. Works well on my biocube.

 

Link to comment

Been using a razor blade on my biocube for 7 years now without scratching. I do not use the razor that often, but when I do it is always a new blade and held on a shallow angle against the glass. The only scratches I have are from when I used a mag float and got sand caught under it.

The first day I had my mag float I got sand in it without realizing. Put a nice scratch about 6inches long in my cube. So upsetting. Now I dont use it near the sand at all. I have a piece of replacement pad for a large mag float that I use to clean the corners and close to the sand by hand.

Link to comment
  • 2 weeks later...

Archived

This topic is now archived and is closed to further replies.

  • Recommended Discussions

×
×
  • Create New...