Jump to content
Coral Vue Hydros

My 14G Fluval M40


Kirk_M

Recommended Posts

I recently upgraded a Fluval Spec V to an M40 when a used system became available at a very good price locally.

 


Equipment:

Light -- Current Marine Orbit LED -- likely to be upgraded to an Radion XR15W Pro

Controller -- Reefkeeper Lite

Auto Top Off -- Tunze Osmolator with a 3 gallon jug for reservoir

Heater -- Cobalt NeoTherm 50W

Skimmer -- Fluval Sea, stock skimmer with setup - might upgrade to Tunze 9004

Filtration -- Innovative Marine MiniMax reactor running Rox 0.9 carbon

Return pump - upgraded to Mini Jet 606 with Innovative Marine Spinstream

Powerhead 1: Jebao RW-4

Powerhead 2: Korallia Nano

 

About 10 lbs or so of live rock from both the Spec V and some dry rock I had lying around from a previous setup, Fiji pink sand.

 

Some dragon's breath (or tongue, whatever it is) macro, a juvenile red and black damsel, bumblebee snails, 5 micro hermit crabs, 5 astrea snail, a crimson serpent starfish, various corals.

 

https://flic.kr/p/otBW17'>14752404870_7441326cb8_c.jpghttps://flic.kr/p/otBW17'>IMG_6314 by https://www.flickr.com/people/42208216@N07/'>kirkmdds, on Flickr

 

https://flic.kr/p/oL63iE'>14938758032_e502ba2eda_c.jpghttps://flic.kr/p/oL63iE'>IMG_6310 by https://www.flickr.com/people/42208216@N07/'>kirkmdds, on Flickr

 

https://flic.kr/p/oL645u'>14938760632_46ec33fcd2_c.jpghttps://flic.kr/p/oL645u'>IMG_6307 by https://www.flickr.com/people/42208216@N07/'>kirkmdds, on Flickr

 

https://flic.kr/p/oL64Lu'>14938762952_dfd47a65e6_c.jpghttps://flic.kr/p/oL64Lu'>IMG_6306 by https://www.flickr.com/people/42208216@N07/'>kirkmdds, on Flickr

Link to comment

Thank you! I had almost all that equipment running on the Fluval V, already, with the exception of the WP-4, which was just too powerful to use.

Link to comment

I had an AI Vega light lying around that I mounted to the wall yesterday, replacing the Current light. I couldn't justify spending over $400 on a Radion PLUS another $100 on the mounting bracket system they just came out with, seeing I already had a suitable light available. Just have to get the wiring cleaned up a bit and I'll post a pic once the lights come on.

Link to comment
  • 1 month later...

I added a Tunze 9004 skimmer to the tank. It was very tight fit in the first chamber of the AIO compartment, and had to be turned sideways to fit. So far, it is heads and shoulders above the stock Fluval skimmer. It started skimming immediately, no break in needed.

Link to comment
  • 2 months later...

Nice set up! Did you do any changes to the back chambers?

 

No. I didn't realize that it didn't have an over/under pattern like a sumped tank until I had already filled it. Else, I would have.

Link to comment
  • 3 weeks later...

So when you say you had to turn the tunze 9004 sideways I am guessing that you have it so the magnets attach to the glass pane on the left side and not the baffle. Does the skimmer cup restrict the flow from the overflow slots at all?

 

Great looking tank btw.

Link to comment
reefernanoman

Nice cube. Following.



thank you! I had almost all that equipment running on the Fluval V, already, with the exception of the WP-4, which was just too powerful to use.

Did you mean rw4? I don't think there's a wp4

Link to comment

Looks sweet man. glad to see a nice setup up from an m series,and ya to bad you didn't get to flop the rear sump to over under. I wonder what there reasoning wasbesides leaving little triangles in the bottom of each sump chamber, maybe the pump wasn't strong enough.

Link to comment
  • 1 month later...

So when you say you had to turn the tunze 9004 sideways I am guessing that you have it so the magnets attach to the glass pane on the left side and not the baffle. Does the skimmer cup restrict the flow from the overflow slots at all?

 

Great looking tank btw.

You are correct. No restrictions.

Did you end up switching the fixture that came with the tank for the Radion XR15w Pro?

 

No, I used an AI Vega I had lying around.

 

 

excellent tank! Is that stand custom? I like it a lot.

 

No, that is the stock stand.

 

Nice cube. Following.

 

Did you mean rw4? I don't think there's a wp4

You are correct.

Link to comment

Archived

This topic is now archived and is closed to further replies.

  • Recommended Discussions

×
×
  • Create New...