Lumia 5.2 issue/question

[jstagner]

I have two Lumia 5.2 connected using makers 5up and makerscontroller. I noticed that when all other channels are set to 0, if I turn on channel 2 that two rows of LEDs come on instead of just one. Is that normal? looks like channel 3 turns on too.

 

If I turn channel 2 to 0 and turn channel 3 on only channel 3 lights up.

[jedimasterben]

Got any pics of the wiring?

[jstagner]

No Ben I don't. I've already put everything back in the RSM C-250 hood. In what way could wiring cause this to happen (not being sarcastic, genuinely asking)

 

 

On channel 2, positive from driver going to positive of 3 up and the negative going out of 3 up into positive of the lumia 5.2. then two lumias connected. Negative of second lumia 5.2 going to negative on driver.

 

On channel 3, positive from driver going to positive of 3 up and the negative going out of 3 up into positive of the lumia 5.2. then two lumias connected. Negative of second lumia 5.2 going to negative on driver.

 

If wiring was issue wouldn't channel 3 also be controlling channel 2?

 

EDIT: Maybe the glow from channel 2 LED makes it look like channel 3 lighting up a little?? But not in reality?

[Horerczy]

That may be the case.

 

The royal blue channel might be exciting the phosphors of the nw channel.

[Milad LEDGroupBuy.com]

That may be the case.

 

The royal blue channel might be exciting the phosphors of the nw channel.

 

what you may be seeing is the royal blue "lighting" the neutral whites. Channel 3 is not actually on.

[Horerczy]

 

what you may be seeing is the royal blue "lighting" the neutral whites. Channel 3 is not actually on.

right. What i said. Except with clarification the channel isn't on. The yellow bits are just glowing.