mlivvy Posted April 10, 2014 Share Posted April 10, 2014 Can someone help me troubleshoot my new leds? The setup- Coralux 4-up Coralux Storm Controller 180w 48v 3.75a power supply The leds are- (2) bxra 950's on a ldd1000h (8) 3w Royal Blue Leds on a ldd1000h (8) 3v UV's on a ldd700h and (4) OCW's on a ldd500h The problem i'm having is when I power it on it begins to flash. If I set the storm controller to 50% the flashing stops. But if I move it up or done it begins to flash again. Here's a small video of the problem showing just 1 channel- Link to comment
evilc66 Posted April 10, 2014 Share Posted April 10, 2014 do you have the ground connected between the Coralux 4-up and the Storm? Link to comment
mlivvy Posted April 10, 2014 Author Share Posted April 10, 2014 Yes, Only 1 ground of the 4 wires as stated by coralux. They've been helping via email also. They also had me try 5v directly to the pwm inputs and it still flashed without the storm controller. Link to comment
mlivvy Posted April 11, 2014 Author Share Posted April 11, 2014 I found the issue. Since evil mentioned grounding I looked into that and did find a grounding issue with the 4up. Soldering mistake on my part. Thanks evil. Link to comment
evilc66 Posted April 13, 2014 Share Posted April 13, 2014 Glad it was something simple. Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.