JimmyJam Posted February 1, 2013 Share Posted February 1, 2013 Hi guys, I see many people talk about doing this mod in chamber 1. Are their any threads that can show me how to do this. Also, is this mod done so people can put a submerisable heater in chamber 1? Link to comment
FragRock Posted February 1, 2013 Share Posted February 1, 2013 Hey, Its been over a year since I did it but was the first thing I did before setting up the tank, getting rid of all the false floors of the biocube, you need to put some pressure in of the corner till it snaps out, Can't remember if i snapped it up or down but alot of force is the trick, I remember some silicone came off along with it, don't mind that it was used to just keep it in place, now you have room to add whatever you want in that chamber.... 1 Link to comment
bonjorno2 Posted February 2, 2013 Share Posted February 2, 2013 i just pushed it out with my hand.... don't be afraid to apply some force. Link to comment
Dnanoreefer Posted February 3, 2013 Share Posted February 3, 2013 I used a wooden spoon with a long handle haha.. But yeah push hard on te corner and bam.. It's out. Heater fits nicely in there Link to comment
Yzfdave Posted August 4, 2015 Share Posted August 4, 2015 In doing this, does I break the floor? Can it be put back into place? I was to clean chamber 1 and get a screw out that I dropped in there! Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.