Bradical84 Posted August 11, 2012 Share Posted August 11, 2012 So I just added a glass top to my cube. I did have it open top for a bit after I put a HOB MH light similar to the 29 HQI. To much water evaporates so this is what I ended up with. Made a template to mark out my glass. glass used is 1/8", if you are not sure about the curves stop by your local true value and they should be able to use you template to cut the glass glass cut. added a small handle to ease with removal and putting glass on. glass installed with MH. Next I'm building a box for the back out of some plexiglass and will use some dark tint to allow my self to see inside but still give it a clean look. Link to comment
C0RALR3EFG1RL Posted February 7, 2015 Share Posted February 7, 2015 Can you make one for me? Anyway you could make a feeding door? Link to comment
Waterhobit Posted February 9, 2015 Share Posted February 9, 2015 Where did you get the handle? Link to comment
Rigby Posted April 8, 2015 Share Posted April 8, 2015 I really need to do this. Mine has an ugly screen over it right now. I'd love to see how you do the rear box. Link to comment
Rigby Posted April 8, 2015 Share Posted April 8, 2015 I bought some glass to make a top for mine today. I haven't cut it yet. When I put it on top of my tank it immediately fogged up. Have you had any problems like this? Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.