calvin415 Posted January 20, 2011 Share Posted January 20, 2011 Current FTS Below is the start of my original build log: Well I guess it's time to start looking to my next setup since I have retired my 12'er. Still putting together all the equipment, but here is what is planned or has been ordered: Equipment: ADA 60-P rimless 18 gallon 24x12x14 Vortech MP-10 ES 25lbs Marco rubble rock AquaIllumination Super Blue Sol LED light AquaIllumination LED Controller Custom acrylic sump with built in turf scrubber Sicce Syncra 2.0 return/turf pump Reef Octopus XP1000 SSS skimmer As always, gravity fed ATO from 55g drump in the garage Hoping to grout the bar this weekend along with getting my sump started... The stand from my 12'er has been converted into a bar, I finished tiling about 12:15 last night, still have some minor work to finish then seal, and then grout. The new tank will be setup on the end of the bar near the support column. Link to comment
Zer0 Posted January 20, 2011 Share Posted January 20, 2011 I'm jelly of your countertop. Link to comment
spanko Posted January 20, 2011 Share Posted January 20, 2011 HUH? What happened to the 12'er? Link to comment
Maeda Posted January 20, 2011 Share Posted January 20, 2011 HUH? What happened to the 12'er? yah, wait what? Link to comment
calvin415 Posted January 20, 2011 Author Share Posted January 20, 2011 I'm jelly of your countertop. Thanks, I think... subscribed Thanks! HUH? What happened to the 12'er? Where have you been??? Link in my sig... yah, wait what? Yep, see above. FedEx just dropped off a nice little present... Link to comment
spanko Posted January 20, 2011 Share Posted January 20, 2011 It was a combination of things, but ultimately I was getting conflicting equipment in the same room. I couldn't watch movies without my lights blocking my projector, and the lights were too bright when they were down low enough. Rather than doing yet another lighting change I felt it was time to just go smaller. I won't lie, 1hr glass cleaning did help in the decision making... OISEE Link to comment
Paleoreef103 Posted January 20, 2011 Share Posted January 20, 2011 Very sad to see the 12 footer go, but also excited about your new project. I'm kinda surprised you didn't build another long shallow acrylic tank that wasn't quite so big. Did you keep anything from the 12' that is going in this one? Link to comment
chazde3 Posted January 20, 2011 Share Posted January 20, 2011 FedEx just dropped off a nice little present... So I glanced at this pic and the tile looked like floor tiling and my first thought was holy crap that vortech is huge lol, Link to comment
schgr.cube Posted January 20, 2011 Share Posted January 20, 2011 NIIICCEEE! I'll add you to the list... Link to comment
peewee1467 Posted January 21, 2011 Share Posted January 21, 2011 this will be gooooood. Link to comment
calvin415 Posted January 22, 2011 Author Share Posted January 22, 2011 OISEE Cool. Very sad to see the 12 footer go, but also excited about your new project. I'm kinda surprised you didn't build another long shallow acrylic tank that wasn't quite so big. Did you keep anything from the 12' that is going in this one? No I've been wanting to take a stab at an ADA for a while now... Not a thing was kept except the dosing pumps and not sure I'm going to use them for anything other than dripping rotifers into grow out tanks... That is if I can get some little ones. So I glanced at this pic and the tile looked like floor tiling and my first thought was holy crap that vortech is huge lol, LOL NIIICCEEE! I'll add you to the list... Cool. this will be gooooood. I hope so... Link to comment
calvin415 Posted January 22, 2011 Author Share Posted January 22, 2011 Skimmer is ordered... Once it is here I can start designing the sump. Link to comment
jerzsky Posted January 23, 2011 Share Posted January 23, 2011 ohhhhh chit! Calvin is at it again! i cant wait to see this one! whooot whooot! Link to comment
Giga Posted January 23, 2011 Share Posted January 23, 2011 Don't know if you've owned a ADA before but your in for a treat. I just got a 60-F and look at this-don't mind the sand and bad pic: And the book they send with it is AWESOME Link to comment
peewee1467 Posted January 23, 2011 Share Posted January 23, 2011 doesnt look like the edge of the tank is touching the table. you should get a rubber mat. Link to comment
Giga Posted January 23, 2011 Share Posted January 23, 2011 +1 ^^^ doesnt look like the edge of the tank is touching the table. you should get a rubber mat. The tank was half hanging off the table so I was holding and taking the picture. it sits flat and I already have a ADA mat lol Link to comment
Maeda Posted January 23, 2011 Share Posted January 23, 2011 Skimmer is ordered... Once it is here I can start designing the sump. Good choice. I'm considering one of these for my big tank. Link to comment
calvin415 Posted January 23, 2011 Author Share Posted January 23, 2011 Subscribed. Cool ohhhhh chit! Calvin is at it again! i cant wait to see this one! whooot whooot! LOL can't wait either. Don't know if you've owned a ADA before but your in for a treat. I just got a 60-F and look at this-don't mind the sand and bad pic: And the book they send with it is AWESOME I've not owned one but I've seen enough of them to want one. Can't wait for it to get here. Good choice. I'm considering one of these for my big tank. I know they say it is rated for a 125 , but I really have a hard time with that... The pump only pushes 125gph which if I'm running 10x turn over through my sump (180 gph), not all the water of my 18 gallon is making it into the skimmer before it is sent back to the tank... ??? Link to comment
Maeda Posted January 24, 2011 Share Posted January 24, 2011 I know they say it is rated for a 125 , but I really have a hard time with that... The pump only pushes 125gph which if I'm running 10x turn over through my sump (180 gph), not all the water of my 18 gallon is making it into the skimmer before it is sent back to the tank... ??? I have no idea. I usually use air draw numbers as an indicator of what size tank it'll handle. My general rule of thumb has been about 30-40scfh per 100 gallons. Not so that it won't/wouldn't work but, I don't think rating skimmers based on water flow really holds up.. i'm running a 1200 gph pump on 100g tank, for about 10x turn over so I would need a skimmer rated for 1200 gallons? How many successful 100g tanks run skimmers rated for 1200 gallons? Link to comment
calvin415 Posted January 24, 2011 Author Share Posted January 24, 2011 Think you mis-understood me... Here is an example of what I was trying to say: ASM G1 is supposedly rated for 100 gallons (way over rated, more like 50 gallons) and it has a Sedra 2500 which is 250 gph pump... Just re-read the rating and they have the Air Intake listed at 125gph not water flow... What the heck is that??? Who measure air intake in GPH? Link to comment
Maeda Posted January 24, 2011 Share Posted January 24, 2011 Just re-read the rating and they have the Air Intake listed at 125gph not water flow... What the heck is that??? Who measure air intake in GPH? Engrish speakers. Link to comment
calvin415 Posted January 26, 2011 Author Share Posted January 26, 2011 Engrish speakers. LOL!!!! Still wouldn't put it on a 125 but can't wait for it to get here and see it in person. Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.