Sunstar Posted December 13, 2010 Share Posted December 13, 2010 Nemesis Nano - or more accurately Pico - nano has a better ring to it. The Evil Decepticon tank of doom, well not really, Has been restarted as of January 2015It can be found here at this link: Nemesis Nano V.2 Same System new Start. Basically Nemesis III am not sure what builds I will attempt with this tank. I may use it to continue research into creating interesting tech. I may work on. I am thinking refugium.So I will include any interesting pictures, if I can figure it out.July 31 2015June 11 2015May 14 2015 shifting things around.April 24 2015 - sorry is blurryMarch 02 2015Livestock:Zoas - unknown - orange (maybe fairy dust, Sunrise Sakura or purple Haze)Zoas - unknown - green (maybe green people eaters0Zoas - unknown - orange skirts - yellow-green oral disk (punk rockers?)Zoas - Horizon ZoaZoas - Sunny DZoas - unknown - green skirts - orange oral disk - Likely Green bay packersZoas - unknown - yellow-green skirts blue, teal to green center - 9possible ultra rasta?)Zoas - unknown - black lightly flecked center orange and black skirt - size of quarter - (reaper zoa?)Zoas - unknown - pink skirt with pink to peachy yellow oral diskZoas - Purple HornetsZoas - unknown - purple/black lime green center with alternating green and blue skirt.Metallic Green Star PolypsCandy Cane CoralGold Hammer CoralBlastomussaMushrooms - Unknown - blue with lime centerMushroom - Unknown - green fleck under some light, under others neat yellow patterning.Anthelia?Green Flower AnemoneNassarius SnailBlue Legged HermitBlack and White Legged hermit (unknown)trochus snailEmerald Crabneon GobyMacro Algaecaulerpa brachypusFeb 26 2015 Original Tank: 2011 (ended 2012 after a manfunction of equipment. I am entering a Nano Tank Contest on the GTAA forums. It starts on January 1st. I hope I am not too... new years eve'd out.I am getting together my parts I need.2 Gallon Rimlessa small Hydor Heater (50 watt)ThermometerFilter (for a refugium build)LightsMoonlights.I intend to make a snazzy stand(to be ordered base rock/sand)and a Master Plan.I won't go into details as to what this image actually means quite yet. But when I get started, I will elaborate. Master Plans: I had three ideas.Plan A.T5 Bulbs (went belly up as I could not find actnics)Plan B.(Successful)Plan C.LED array - Installed March 16thEvolution: First of month Front tank Shots.January 1 2011February 1 2011 (Tank went to brink of crash due to nass death)March 1 2011April 1 2011May 1 2011June 1 2011June 27 2011 (Contest close) Link to comment
Sunstar Posted December 28, 2010 Author Share Posted December 28, 2010 Edit: New Lighting Thread: http://www.nano-reef.com/forums/index.php?...262586&st=0 The new plan: I can show you what I have for now.... worked on it a bit the other day. Need to go back to work on it some more. Hopefully done in time... although the lack of the 12 volt DC 2 amp brick delays things. The basica inside frame is of MDF. I dislike MDF like it is the bubonic plague. my brother in law insisted this was okay. IF I seal the crap out of it. Which I will do. Solid pine shelf I bought from Ikea for 4 dollars was a bit short, but I will be painting the whole thing in black anyway. I bought it so it would save me a lot of finishing effort. The back of the case I cut the hole for the fan out using a took that cuts out wheels for wooden toys. That was quite a bit of fun. I also trimmed off some of the plastic around the fan so the fan's frame fit exactly into the hole. All I need to find. now is the grill and the power supply. What I did not take a Photo of this time around was the second hole that would be in the upper right hand back of the case. this is where the electrical will exit. Hanging it higher than the main frame so you force a drip loop. my DYI fuge is hanging off the back. Just so I can decide how much depth I need The structural integrety of the box did fail over night. the glue refused to stick to the black surface, the biscuit joints gave out. But this was not a problem for Good old Sunstar who has a secondary solution to most of her plans. I counter sank screws into the wood, deep enough to cover it with a plug cut from the same wood material. My brother in law has so many fun tools in that wood shop. What he needs to get is a lathe (uber fun those are :3, Jointer (terrible memories of spraying blood when a classmate did his hand in, Bandsaw) Things like plug cutters, buiscuit jointers, routers, templates for this that and the other, clamps, circle saws... I was in heaven. Even a decent shop vac. the white wood is attached to the top which is a lid overlaying the main box structure. The light frame will be attached at this point. The joys of hole saws. two hole saws were used. One cut a wider shallow hole, then the other one smaller and right the way through. this helps manage the problem of the wood being a bit too thick for the fixture. But with it being counter sunk, I could get the light socket in and secured. I need to get back up to the workshop to joint the light fixture into the lid, and get the wiring done. I got the hinges cut out, but I forgot my camera at home so I could not get them photographed. really thing thing looks quite excellent. Link to comment
Wilioli Posted December 28, 2010 Share Posted December 28, 2010 niiice. that's cool that you can 'do stuff'.. lol i wish i could.. hhahah, good job Link to comment
Sunstar Posted December 29, 2010 Author Share Posted December 29, 2010 I drilled holes into the lamp frame near the top ehrtr it will join with the lid. this is to improve air supply. Unfortunately I had to ditch a couple ideas due ot lack of space. instead I cut the wires shorter and added a new plug in the end. I painted parts of it black, well I painted it all black, but discovered the brown wood area is an oil based paint so the latex peeled. scrubed it off, painted the plain wood black and it looks very lekker. (nice). I can't wait for the starters pistol to go off and I can get the sand and rock I've been seeding added to the tank, and the coral frags I have already and waiting. Overflow added to the 2 gallon tank, Back painted black. everything is ready to go. Link to comment
Sunstar Posted December 29, 2010 Author Share Posted December 29, 2010 woot, while I was at it... I managed to squeeze enough juice out of my batteries to get two photos: With the light sheild down Light s heild up. I need to add a few more things, so the light fixtures will come out again, then I can hopefully add my moonlights in between the big aft bulbs. Link to comment
Wilioli Posted December 29, 2010 Share Posted December 29, 2010 wow.. what kinda lights r those? Link to comment
Sunstar Posted December 29, 2010 Author Share Posted December 29, 2010 coralife compact flouresent 50/50 bulbs. One half of the bulb is acticni the other is 10k Link to comment
Sunstar Posted December 29, 2010 Author Share Posted December 29, 2010 Okay tonight's fun is installing: Guardian Stripez What this normally is used for is to make otherwise interesting cars tacky and cheap looking. But it's function for me is to act as a reflector to get as much benefit from the light as possible. So far I got the instalation of the top decent. One spot is.. meh because of the L brackets I used. Using the instructions which says to saturate everywhere with soapy water so you can guide it into position, smooth it out and clean it up with a nice soft cloth. A+ on the initial important instalation!! I just need to work out the sides. Picks without the glare of last night: I will be, when I am done fussing with the reflector, attach the wires to the lid so they don't wiggle around. And one light in the hood, and BOY is it blinding. Link to comment
Sunstar Posted December 30, 2010 Author Share Posted December 30, 2010 ha ha well now.. yeah.... My husband brought home a random brick from work fo rme to try to splice. it worked... but apparently my fan is blowing into the case and not out. SO the fan will hit the workbench again and I'll dremmel more off it to reverse it and then re-test it before siliconing it in. Dremel and handsaw. depends if I can findmy dremel again.... where did I put it away? I will get it to work, this I promise!!! Assorted wires, carefully held in place. the wire things came with little nails, I swapped them for brass screws. Moonlights positioned in between my coralife bulbs. As promised. AC70? Conversion to fuge. I did this a week or so ago, test ran it for a while. works nicely. Admittedly it is rough. How mine works. Water goes into the refugium after passing through the small overflow that is setup to aid surface skimming. it goes in from the impeller and is forced down and through a filter insert. Marina slim filger cartridge (bio carb) I will run the three I have until they are used then merrily make my own sleve to go over the frame after I somehow strip it of fluff. that way I can stuff it with Phosban or extra carbon. It slips in easily and as I like to say, works a charm :3 Inside the refugium section, I will forgo the sand, and stuff it with chaeto (or rather the chaeto will stuff it itself) and the heater. the heater is small and will fit inside the filter nicely. I have been running tests on equipment. Link to comment
Sunstar Posted December 31, 2010 Author Share Posted December 31, 2010 Wooo! the fan is ago! eeets sucking out my heat! Link to comment
Sunstar Posted January 1, 2011 Author Share Posted January 1, 2011 IT STARTS! aaaand the batteries are dead. but I managed to get two shots of a somewhat cloudy tank. As I said I was seeding the rock in a tank. same tank had most of the frags I wished to use in my nano. So frags rocks, and sand got shifted. the three carpet nems found their way into the tank, and I found two of three in the intake of the filter. I hope they stay where I moved them to and not go drifting again. Corals I plan to try in here: Tiny bit of kenya tree (can I bonsai this ) Pulsating xenia Powder blue anthelia Zoas of some sort. small bit of chalice frag green Star polyps and some finger looking SPS I had kicking around Macro algaes are mostly in the fuge. there is that hard one, forget its name again, in the display and if any of the red stuff from carmanh survived, a bit of that will go in too. about 5am this morning: cloudy about 11am this morning: Sunny skies until a big hand moved in and made it...cloudy Link to comment
Sunstar Posted January 3, 2011 Author Share Posted January 3, 2011 A little less cloudy. Link to comment
Jake42393 Posted January 3, 2011 Share Posted January 3, 2011 Looks good you are very crafty haha! Link to comment
pismo_reefer Posted January 3, 2011 Share Posted January 3, 2011 Those pc's "foul", after about a month. They shift spectrum, and promote cyano.... Just letting you know from experience. Link to comment
Wilioli Posted January 3, 2011 Share Posted January 3, 2011 Those pc's "foul", after about a month.They shift spectrum, and promote cyano.... Just letting you know from experience. if thats true then that would explain my 10g a month into it.. lol great looking tank! looks like an overflow on the left? Link to comment
Sunstar Posted January 3, 2011 Author Share Posted January 3, 2011 Oh that is not good... is there some sort of short bulb I could use, or LED?s Link to comment
bringman Posted January 3, 2011 Share Posted January 3, 2011 I used the coralife 50/50s for 2 years in a 5 gallon hex before getting a biocube. Good bubs for the price, never had algae problems. Keep up with your sandbed and you will be fine. Change the bulbs every 6 months. Great DIY tank. Link to comment
Pxiong85 Posted January 3, 2011 Share Posted January 3, 2011 I would of just gotten a PAR30 Bulb for it. For the price of those three PC the 30 would of been better. Very nice tank btw Link to comment
Sunstar Posted January 3, 2011 Author Share Posted January 3, 2011 I would of just gotten a PAR30 Bulb for it. For the price of those three PC the 30 would of been better. Very nice tank btw the three bulbs cost me 30 bucks. what is a par 30 bulb? bringman: What do you mean by "keep up with the sand bed" Keep it stirred and lightly cleaned? Link to comment
Sunstar Posted January 7, 2011 Author Share Posted January 7, 2011 I am most pleased to announce that I ditched the freight train of a fan for another salvaged fan that is very quiet. I am happy this means I can keep the fan running rather than turn it off when it gets obnoxious. (which is a lot of the time) Link to comment
Sunstar Posted January 10, 2011 Author Share Posted January 10, 2011 here she is: my first mini maxi!: I am SO gonna get more! Please note the pink coraline starting to cover the w hite rock :3 Link to comment
Sunstar Posted January 15, 2011 Author Share Posted January 15, 2011 Posted this in the wrong thread: Diatoms still present, but not as crazy as they were. Things are a bit happier now. New pic: Not much changed Link to comment
Funktastic Wint Posted January 18, 2011 Share Posted January 18, 2011 Posted this in the wrong thread: Diatoms still present, but not as crazy as they were. Things are a bit happier now. New pic: Not much changed me loves that anemone there. makes me want a strawberry banana milkshake tho Link to comment
Sunstar Posted January 21, 2011 Author Share Posted January 21, 2011 thanks. I am sure she'll get darker as time goes on. To pick the branch I wanted to frag of the purple gorgonian, I actually selected one from the middle. other branches cna grow in to fill the area, it'll look awkward for a bit. But the frag I got, which is in this picture, has a straight enough stem for my purpose. In the back and for now, I have added a pair of hammer coral heads. A pair of candy cane heads in the middle (bright green) Stuff will get moved around once I can determine the "behaviour" of the new additions. I am waiting to see the feather caulptra grow out. Salt water tanks take a long time to do anything. Link to comment
Sunstar Posted January 22, 2011 Author Share Posted January 22, 2011 Picture floooood. I had the lid ajar this morning so I could do my maintanance. Wooooo my avatar by the tank! Lovely macro.. bleached sps Another macro. Love this one. Green Star Polyp. Frag of my first coral colony ever. \ Green Star Polyp, a seemingly brighter green colony(from a hitch hiker) Yours Truly Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.