Ive got a few leds for sale. ALL LEDS REQUIRE A HEATSINK PAYPAL ONLY
Shipping and handling is only applied once. So 10 leds is same shipping as one
(10)Osram LE CW E3B $10ea.+SH Data Sheet Forward Voltage-min(17.4v) typ(20.8v) max@700ma(24.5v) Forward Current-Min(100ma) Max(1000ma)
Picture
(10)Osram LE UW E3B $10ea.+SH Data Sheet Forward Voltage-min(17.4v) typ(20.8v) max@700ma(24.5v) Forward Current-Min(100ma) Max(1000ma)
Picture, same as the other, no visible difference
(5) Citizen CL-L251 $5ea.+SH DataSheet Forward Voltage-Min(8.75v) Typ(9.30v) Max(10.5v) Forward Current-Typ(480ma) Max(560ma)
Picture
(3)Citizen CL-L220 $7ea.+SH Data Sheet Forward Voltage-Min(10.5v) Typ(11.8v) Max(12.9v) Forward Current-Typ(1440ma)(max-1.68a)
Picture
(1) Triangular boards with 27 leds mounted! $30+SH yes, I said 27. I dont have any specifics on these, all I can tell you is they run off of 29v about ~1-1.5A. They are BRIGHT, its either a white or cool white color. I'll also send along a dry thermal pad for each one. In the video, the clicking you hear is my cameras white balance going nuts.Also the lower left led had tape over it holding a wire in place, so I didnt have to solder it.
Picture
Video
***NEW 48 Led board I have 2 $45+SHea. I have no specs on these, will get a video tonight and upload probably tomorrow. Runs on ~36v they have a wire connector in the middle, one is fine the other has wires broken off in it. On this one wires can just be soldered to the pads of connector.

SOLD
(1) 27 led triangular board
(3) CL-220

new led

bump

buy some leds

I'm curious about the 27 light set up. could that somehow be modified to put under the hood of a 12g eclipse and stay dry? The size looks just perfect but not sure if it would be too much light for that small of a tank. And I wouldn't want to start a fire by it getting wet either. I know nothing about wiring of lights.

Im sure you could just mount it in there then just get a sheet of plexis glass and cut it exactly to your hood so it protects it

yep, just mount a piece of plexi between the water and leds. I'll measure the triangle exactly later. Cant find my tapemeasure. Just dont forget you also need to squeeze a heatsink up in there.

Sound like more than I know what to do with, I should probably just stick to a retro kit for it.

ttt

bump

ttt

bump new board. 48! LEDS!

bump, still for sale