check out my signature to see my build thread.
Full Version: 2g rimless custom pico cube, 9x9x7in -Sold
Sold
check out my signature to see my build thread.
check out my signature to see my build thread.
oops. I ment to put $100 for the whole sha-bang
If you end up willing to separate let me know because interested in the light.
QUOTE (burky_tc @ Jan 28 2010, 09:11 PM) 
If you end up willing to separate let me know because interested in the light.
hmm.. I'd like to sell it all together.. its kind of a perfect set up together.. kind of falls apart I feel when you take things away from it.. I guess its the artist in me..
for any potental buyers out there.. shipping should run you around $30 Priority, $20 parcel post. paypal only.
Put a post in our Pico Methodoly Contest thread in case anybody would like to buy your setup and enter our contest.
Looks good. If nobody bites -- then it was meant to be and you enter our contest with that tank
Looks good. If nobody bites -- then it was meant to be and you enter our contest with that tank
What are the dimensions on the display?
oops... just saw them in title...
oops... just saw them in title...
QUOTE (c_k_kuehne @ Jan 31 2010, 12:29 AM)
Put a post in our Pico Methodoly Contest thread in case anybody would like to buy your setup and enter our contest.
Looks good. If nobody bites -- then it was meant to be and you enter our contest with that tank
Looks good. If nobody bites -- then it was meant to be and you enter our contest with that tank
yeah, I had some kid trying to just buy the tank and light.. I mean, would you call up Oceanic and be like.. can you just sell me the light and tank from the bio cube?.. I dont need the false wall and everything behind it. NO!! Dont question the creator people, I used the tank for 6 months, if you try to set it up any other way, you defeat the purpose of the design.
and good luck fitting any other heater in there.. QUOTE (Wendy @ Jan 31 2010, 01:21 AM)
What are the dimensions on the display?
oops... just saw them in title...
oops... just saw them in title...
hehe.. no worries.
Is there silicone between the panes of glass or is the silicone just pushed into the corners?
QUOTE (hemi @ Feb 1 2010, 11:12 AM)
Is there silicone between the panes of glass or is the silicone just pushed into the corners?
both.. its sealed tight.. not a single leak.
SO i have this Giant box in my living room and it needs to go.. I'll Do $100 shipped, but it will be shipped parcel post.. (slow mail) PM if interested. and no I will not sell things separate, this is my Mona Lisa, I spent 6 months planning out this tank and design, and spent 2 months building it. I promise, it just wont work apart.. or you'll just be buying the same stuff down the road for it..so why not just get it all now.
Tank is still here.. still for sale for $100 shipped.. I will be putting this on ebay in about 1 week if no one takes it on here. probably wont be as nice of a deal there..
ok, price drop, I need to get this thing out of my house,
$80 OBO, plus shipping. PM me if interested.
$80 OBO, plus shipping. PM me if interested.
OBO offer folks (realistic) ... this box is too big just to sit around my house, its got to go!!!! I know someone needs a pico!!
Ok People, I'm sick of everyone asking me to sell this thing in parts.. so. here it is... In, parts..
Tank-stand-filter-$50 plus shipping
Light - $30 plus shipping.
heater/thermometer - $10 plus shipping.
Tank must sell first.
Tank-stand-filter-$50 plus shipping
Light - $30 plus shipping.
heater/thermometer - $10 plus shipping.
Tank must sell first.
can i get a pic of the light
I think your biggest problem is the tank kinda looks like crap.
You can buy a ADA with an AC70 and a clip on light that will look 10x better, low iron glass, and great looks.
You can also get a used Nanocube for 25 - 50 bucks with better equipment.
Sorry to bust your bubble. Just my opinion but you might be able to get $30-40 for the whole tank.
You can buy a ADA with an AC70 and a clip on light that will look 10x better, low iron glass, and great looks.
You can also get a used Nanocube for 25 - 50 bucks with better equipment.
Sorry to bust your bubble. Just my opinion but you might be able to get $30-40 for the whole tank.
you just burst his mona lisa bubble.
way to ****block a fs thread
glws airman
way to ****block a fs thread
glws airman
Qwiv keeps it real i guess.
QUOTE (Qwiv @ Mar 19 2010, 01:55 PM)
I think your biggest problem is the tank kinda looks like crap.
You can buy a ADA with an AC70 and a clip on light that will look 10x better, low iron glass, and great looks.
You can also get a used Nanocube for 25 - 50 bucks with better equipment.
Sorry to bust your bubble. Just my opinion but you might be able to get $30-40 for the whole tank.
You can buy a ADA with an AC70 and a clip on light that will look 10x better, low iron glass, and great looks.
You can also get a used Nanocube for 25 - 50 bucks with better equipment.
Sorry to bust your bubble. Just my opinion but you might be able to get $30-40 for the whole tank.
show me the way, master qwiv
QUOTE (Qwiv @ Mar 19 2010, 04:55 PM)
I think your biggest problem is the tank kinda looks like crap.
You can buy a ADA with an AC70 and a clip on light that will look 10x better, low iron glass, and great looks.
You can also get a used Nanocube for 25 - 50 bucks with better equipment.
Sorry to bust your bubble. Just my opinion but you might be able to get $30-40 for the whole tank.
You can buy a ADA with an AC70 and a clip on light that will look 10x better, low iron glass, and great looks.
You can also get a used Nanocube for 25 - 50 bucks with better equipment.
Sorry to bust your bubble. Just my opinion but you might be able to get $30-40 for the whole tank.
yeah, I think open opinionated people like you are the reason I stopped liking this hobby.
Go build a tank from the ground up and give me a call when you want to sell it for dirt cheap. I'll be busy running a company, reason 32 I'm getting out of reefing.
oh, P.S. - I'll probably donate this tank to a high School science class before selling it to someone below what I want out of it, that way I can at least write it off for what I feel its worth. oh, P.S.S. If you were to hire me for an event (oh, did I mention I've owned a entertainment and event company, for 10 years..) I charge by the hour, so an hour of my time is worth between $75 - $150, and I put about 8 full hours into this build. I think $80 is a pretty good discount by my rate for labor and time.
oh any one last thing Qwiv, why don't you leave your smart @%% comments for the rest of the board and let me and anyone else just trying to sell our stuff without being flamed up on their own topic. For once it would be nice to just chat online without having someone who doesn't even know another, who feels their knowledge and input is so vast, they must enlighten us all.. well, do me a favor, and get some friends who you didn't gain my clicking on the friend request button or subscribing to their thread. So of us still have lives outside of our hobbies. Thanks
Airman also keeps it real.
QUOTE (ThrivingNanoTang @ Mar 20 2010, 01:26 AM)
Airman also keeps it real.
touche
QUOTE (Qwiv @ Mar 20 2010, 12:36 PM)
Seriously, you have been trying to sell this thing for over a month. Maybe take a better pic because I don't see anything besides ragged edges.
Sorry to rive you a reality check. Just read your sig and say your awesome a few times until you feel better about yourself. Glad you make money and aren't depending on your sale here to pay the morgage. Keep your day job.
Sorry to rive you a reality check. Just read your sig and say your awesome a few times until you feel better about yourself. Glad you make money and aren't depending on your sale here to pay the morgage. Keep your day job.
You might want to read the Classified section Rules before posting:
QUOTE
Unsolicited negative or argumentative comments about items for sale, or prices of items, are not permissible. Violation of this rule may result in revocation of classified forum access, suspension of posting ability, or account suspension.
QUOTE (Qwiv @ Mar 20 2010, 12:36 PM)
And if you want to measure ****s, I am younger than you and make more money than you.
That's what they all say.
haha wow. free bump dude GLWS
QUOTE (airman_verde04 @ Mar 20 2010, 04:18 PM)
yeah, I think open opinionated people like you are the reason I stopped liking this hobby.
Go build a tank from the ground up and give me a call when you want to sell it for dirt cheap. I'll be busy running a company, reason 32 I'm getting out of reefing.
oh, P.S. - I'll probably donate this tank to a high School science class before selling it to someone below what I want out of it, that way I can at least write it off for what I feel its worth. oh, P.S.S. If you were to hire me for an event (oh, did I mention I've owned a entertainment and event company, for 10 years..) I charge by the hour, so an hour of my time is worth between $75 - $150, and I put about 8 full hours into this build. I think $80 is a pretty good discount by my rate for labor and time.
oh any one last thing Qwiv, why don't you leave your smart @%% comments for the rest of the board and let me and anyone else just trying to sell our stuff without being flamed up on their own topic. For once it would be nice to just chat online without having someone who doesn't even know another, who feels their knowledge and input is so vast, they must enlighten us all.. well, do me a favor, and get some friends who you didn't gain my clicking on the friend request button or subscribing to their thread. So of us still have lives outside of our hobbies. Thanks
Go build a tank from the ground up and give me a call when you want to sell it for dirt cheap. I'll be busy running a company, reason 32 I'm getting out of reefing.
oh, P.S. - I'll probably donate this tank to a high School science class before selling it to someone below what I want out of it, that way I can at least write it off for what I feel its worth. oh, P.S.S. If you were to hire me for an event (oh, did I mention I've owned a entertainment and event company, for 10 years..) I charge by the hour, so an hour of my time is worth between $75 - $150, and I put about 8 full hours into this build. I think $80 is a pretty good discount by my rate for labor and time.
oh any one last thing Qwiv, why don't you leave your smart @%% comments for the rest of the board and let me and anyone else just trying to sell our stuff without being flamed up on their own topic. For once it would be nice to just chat online without having someone who doesn't even know another, who feels their knowledge and input is so vast, they must enlighten us all.. well, do me a favor, and get some friends who you didn't gain my clicking on the friend request button or subscribing to their thread. So of us still have lives outside of our hobbies. Thanks
hahaha nice work, watch them flood in to buy it now.
Sold . Thanks for stopping by.
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.