mbarton2010
Oct 25 2009, 04:24 PM
How can I make a 1 gallon sump for a standard 2.5g AGA tank. I have a 1g tank that I was planning using. I don't want to drill or anything. What will I need??
FiReBrEaThInGCuTtLeFiSh!XD
Oct 25 2009, 04:50 PM
overflow box, bulkhead and return pump
mbarton2010
Oct 25 2009, 05:05 PM
Thanks. I'll look all that up
mbarton2010
Oct 25 2009, 05:16 PM
is there anywhere i can buy a small setup like that?
FiReBrEaThInGCuTtLeFiSh!XD
Oct 25 2009, 05:20 PM
I doubt it, You'll probably have to get them (most overflow boxes come with bulkheads already) and then put it together yourself. Try looking around though chances are none one is selling a 1g sump. you might also want to look into to putting some baffling up to prevent sand from messing up the return pump
mbarton2010
Oct 25 2009, 05:31 PM
QUOTE (FiReBrEaThInGCuTtLeFiSh!XD @ Oct 25 2009, 05:20 PM)

I doubt it, You'll probably have to get them (most overflow boxes come with bulkheads already) and then put it together yourself. Try looking around though chances are none one is selling a 1g sump. you might also want to look into to putting some baffling up to prevent sand from messing up the return pump
Ok. I'm still a n00b with all this DIy stuff.
mbarton2010
Oct 25 2009, 07:09 PM
So anymore ideas? How much would the idea already said cost??
mbarton2010
Oct 26 2009, 03:54 PM
bump
cody6766
Oct 27 2009, 02:09 PM
for a tank this small, drilling may be your best option. You have to worry about breaking the glass though. A HOB overflow would take up a lot of space in such a small tank.
blueblue48
Dec 16 2009, 09:48 PM
you could use a back to back approach, where the tanks are touching back to back with an over the wall U-tube type thing??

lol
travisurfer
Dec 16 2009, 09:50 PM
Your best bet is to partition the tank and setup a false back wall with in-tank sump behind it.
mbarton2010
Dec 17 2009, 10:03 PM
ive already built this tank into an aio lol
Lingwendil
Dec 24 2009, 01:05 AM
QUOTE (blueblue48 @ Dec 16 2009, 06:48 PM)

you could use a back to back approach, where the tanks are touching back to back with an over the wall U-tube type thing??

lol
That's what I did with mine, except with two 2.5G's, and a return pump in the back tank. Worked great for two years without issue.
GUSGUS 16
Dec 27 2009, 04:16 PM
then you have a 3.5 gal keep it simple
Twz
Dec 28 2009, 12:06 AM
kcl
Dec 28 2009, 09:31 AM
i would look toward a cpr style overflow. they are relatively slim in design and work quite well. then as a sump look around your local hardware store for a rubbermaid container of some sort.
mbarton2010
Dec 28 2009, 05:22 PM
im done with this tank!!!!!! lol i broke it. im getting my 14g wednesday though. go check it out in the all in one section!!!
skimlessinseattle
Dec 28 2009, 05:39 PM
I would recommend using a continuous siphon overflow, and making the sump much larger, say about 10 gallons. This would allow you to have a refugium, which would be uber beneficial for your system. A 1 or 2 gallon sump really wouldn't have much impact, but a 10 gallon would. You could easily quadruple your water volume, and add an ATO to the sump, store the heater, put more LR in there, a deep sandbed, chaeto, caulerpa, the possiblities are endless the bigger you go. Sumps are great. Don't be afraid to go big!
mbarton2010
Dec 28 2009, 06:57 PM
not being a jerk but can yall read? lol i broke this tank lol
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please
click here.