what do you think of this upgrade ?





The LED that now is working
WH = CREE XR-E R2 (WG) 6000°K
RB = CREE XR-E R2 RoyalBlu ( 455 nm )

LED to Buy

B = CREE o Luxeon Rebel Blu ( 470 nm )
CY = CREE o Luxeon Rebel Cyan ( 505 nm )
WC = CREE o Luxeon Rebel White ( 3000-4500°K )

Some people say that the cyan LED is like green, do you confirm that isn' t so ?

You think that with this mix i went for 16000°K ?

THANKS A LOT

or this ?



What do you think ?

I think either would work, but I would look into using simple removable methods of mounting the LEDs while you are experimenting with placement. You can use a little silicone to attach them temporarily (add pressure to the pcb while the silicone is curing). Once you have your final locations set, then drill and tap.