I'm going to be custom building all in one tanks using all-glass aquariums. Sizes will range from 2.5g to 75g and will be built to your specifications.

Each tank will have the following options:
- Spray bar return w/Maxijet PH
- Locline return w/Maxijet PH
- Hang on fuge light (passively cooled or air cooled)
- Media rack(s)
- Frag rack(s) [Acrylic or eggcrate]
- Built in frag rack (best for prop tanks)
- Peninsula style
- Standard style
- Center style (Only available on breeder tanks, great for 4-sided viewing)
- Painted (black or blue; false wall, floor (for barebottom), rear, sides)

Here's a picture off a 20L AIO I built.


For the first couple of tanks the cost will be just materials and a frag or two as I'm trying to get a bunch of tanks under my belt. I'm eventually going to create a website and do this as I'm going to school for a source of income. If you're interested shoot me a PM or e-mail me at LevineXB@GMail.com

It's also worth noting that I'm trying to design a skimmer and wavebox for these AIO systems and will post if I can get something concrete. If you're interested in buying a system and have any other ideas I'm sure I can fabricate whatever you need done.

Wow cool.Be even cooler if you sold it as a DIY kit.

That's not a bad idea, the only problem I foresee is getting everything to fit correctly without having a copy of every tank at my house. The dimensions may be a bit tricky. I'll definitely give that some thought though.

+1

would be a lot easier to ship the kits.

go to your neighborhood petco and get one of everything, make a model, then return the suckers

Thanks for the ideas guys. I'll be going ahead with it and shipping out DIY kits with everything built, all you'd need to do is silicone it into your tank!

I guess I'll create a new thread soon-- This one should be fine for the meantime though.

+2

definitely be interested in a DIY kit.

I'll start the DIY kits as soon as someone PM's me!

You've got a PM

Keep me posted as I plan to get a 75 AIO in near future!

DrCooper, 75g won't be a problem. Just going to have to get 1/2" plexi and may cost a fair bit amount of money. But I will be more than happy to build it for you.

Good luck from the 305

you wouldn't be willing to build an overflow box for me, would ya?

Ryan, sounds good... PM me with your details.

pm sent

here's the mock-up i was talking about.

Depending on the weather I should be able to finish tomorrow sometime. Pictures will be posted when I'm done

good deal, i look forward to it. once i have the box in hand i get to start re-siliconing the tank... yay lol.

Got Ryan's overflow done. Here's the pictures:





Here's the bottom of the cover:


Should be shipping out on Monday. Anyone else need anything done? I've gotten a lot of PM's but nothing serious besides Ryan.

looks awesome man! thanks

wow that is some nice work. could you do a aio system for my new rimless tank. it will be a 20x24x20[l/d/h]. so i think the 'box' could be about 4" deep. so something like 20x4x20. i like to keep water level appr. 1" below top edge. i can send you a simple image of the setup i would like.

aggman, PM'ed.
icecool217, PM'ed
lkc, PM'ed

Thanks for the interest guys! Hope to build something for you guys soon!

bump -- I'm going to try my hand at making an acrylic tank.

Alright, got the go ahead on a 20L AIO system with spraybar return. Will post pictures once it's completed! Thanks Laura!

got the overflow box the other day and it looks great! fits PERFECTLY too

Thanks Ryan

I'm looking for an acrylic AIO...I used to have one made by some guy on here, but I can't remember who it was. Something in the 8-10 gallon size would be perfect.

Think you could shoot me a price on something like that and send me some sort of mock up on it?

Thanks!

Now that the weather is finally starting to cool down I'm going to start doing this again. If you need any kind of acrylic fabrication let me know! Overflows, AIO's, media baskets, lids for your tank... anything.

You do nice work. Will check with you on my next project.

Thanks Lawnman. Let me know if I can help w/your project!

I may in the near future. will pm you with some ideas soon.

All PM's replied to.

Got a go ahead for a 5.5 AIO w/MJ 600 to spraybar return (Thanks Mark JBM)

feel free to post up pictures of the stuff so others can see.

once i recieve it, i'll also post up pictures of the finished product.

This is gonna be SICK!

pics forsure Im interested in the work mb ordering

Mark's (JBM) 5.5g AIO - Better pictures tomorrow, hopefully with a regular camera





Sorry bout the second pic, dunno why it's so blurry.

Bump

yesh, bump....

Whats the difference between Peninsula style, Standard style, and Center style?

Drew this up real quick.

Testimonial from Mark (JBM)

yesh!

Could you make a cover for a 29 biocube but instead of a solid lid, have maybe a 1" frame that I could attach clear 1/4" mesh to? I think there might be a lot of people looking for a screen top to stop their fish from carpet surfing.

can you pm me a price for a 20L with the plumbing and spray bar and all that. I want a standard style B

Capt. Shuda, hey buddy! I'll send you and 035mazdaspeed a PM soon.

OK CoRPS, I like "Corps Customs". Great idea. You have me thinking.

HAPPY THANKSGIVING!!

PM'ed!

Alright guys, in the spirit of Black Friday I'm going to run a deal. I'm going to discount all my work by 10% if you order on Black Friday.

Since I probably won't be able to get all quotes out by then. If you paypal me $0.25 it will lock you in on the 10% off deal. Paypal is LevineXB at Gmail dot com - The discount however will NOT apply to things like pumps or plumbing, just on the acrylic work itself!

You will have two weeks to complete your order with me for the 10% off if you want to get in on the deal!

THANKS!

pm'd

pm box full

Emptied.