supernip
May 29 2009, 12:12 PM
QUOTE (evilc66 @ May 29 2009, 08:16 AM)

I still have to sit down and figure out what is left over. There isn't much as there was only one non payment and three cancellations. I also ordered a few of everything for myself
thats actually a very impressive retention rate. no worries on that then
evilc66
May 29 2009, 02:06 PM
I was pretty pleased overall.
Marteen
May 29 2009, 02:44 PM
1900 LEDs!!! Wow! I hope they at least gave you free shipping!
evilc66
May 29 2009, 03:46 PM
Pfft! Yeah right! Their shipping isn't bad though. The shipping for the drivers sucks becuase they don't have a UPS or Fedex account, so there are no discounts. I don't think I will be purchasing from them again. Too many headaches.
jestersix
May 29 2009, 04:19 PM
Glad to hear the Pico stuff came in - really looking forward to some serious light on the Betta Cube I started!
rvadub
May 29 2009, 05:07 PM
QUOTE (Marteen @ May 29 2009, 03:44 PM)

1900 LEDs!!! Wow! I hope they at least gave you free shipping!

Hell, they don't even have the drivers yet! Couldn't pass that one up. hahah Getting ready for the slap in the face coming my way....
evilc66
May 29 2009, 05:45 PM
Different company
rvadub
May 29 2009, 07:00 PM
QUOTE (evilc66 @ May 29 2009, 06:45 PM)

Different company

I've been slapped ahah. Well played.
GoingPostal
May 29 2009, 10:38 PM
I miss all the good stuff! If there's a 20k pico bulb left over at the end of this let me know. Going to have all of nano reef running leds at this rate.
BIGGUN
Jun 1 2009, 07:57 AM
Evil,
Will you be PMing us when the orders go out or will we just be pleasantly suprised when they get here?

Kevin
g8gxp
Jun 1 2009, 08:01 AM
based on the last update the 1st batch of drivers doesn't arrive for another week and a half, so don't start holding your breath just yet.
evilc66
Jun 1 2009, 08:21 AM
I will be sending PMs out when orders get dropped in the mail. I got volunteered this weekend by my wife to paint the house. Needless to say I got less done than I wanted. House is starting to look good though

First orders will be out today.
evilc66
Jun 1 2009, 10:28 AM
QUOTE (evilc66 @ May 28 2009, 10:51 AM)

I have had a number of people ask me about this, so I might as well post an update here.
Parts are out to the anodizers, but I'm still waiting on a number of parts to come in yet. I'm expecting to start shipping these out in about two weeks. I appologize for the delay on this, but with the volume of orders, it's taking quite a while to get everything straight by myself. Please be patient.
Maddevil1
Jun 1 2009, 10:54 AM
Hey Evil,
Did you get a chance to send out any orders? When they do go out, will you PM the tacking info?
Thanks!
DHaut
Jun 1 2009, 11:09 AM
Evil, will the Satellilte retros go out before the Satellites? If it's going to be later than June 20, let me know and I"ll PM you a new address to ship them to (I'm moving).
Thanks man.
evilc66
Jun 1 2009, 12:34 PM
You guys need to read a little more carefully

First orders will be shipping TODAY. I was busy all weekend painting the house, like I stated four posts ago.
Satellites and retros will probably be going out at about the same time, but I'm not sure I will be getting them out by the 20th. DHaut, if you don't hear from me by then, just send me the new address when the time comes.
cet98
Jun 1 2009, 12:56 PM
evil....
don't post anymore!!!!....your post count is 6,666...
too perfect for a guy with a name like "evilc66"
Maddevil1
Jun 1 2009, 02:40 PM
QUOTE (evilc66 @ Jun 1 2009, 11:34 AM)

You guys need to read a little more carefully

First orders will be shipping TODAY. I was busy all weekend painting the house, like I stated four posts ago.
I totally missed that post!
evilc66
Jun 1 2009, 09:34 PM
QUOTE (cet98 @ Jun 1 2009, 01:56 PM)

evil....
don't post anymore!!!!....your post count is 6,666...
too perfect for a guy with a name like "evilc66"


totally missed it.
fishybear
Jun 1 2009, 09:57 PM
soo hawt so excited for my satellite. corals were extending in excitement!!!
Marteen
Jun 1 2009, 10:00 PM
Can't wait for my lenses to come in! I've got all my LEDs in place and I want to try out the lenses before I start soldering.
Maddevil1
Jun 2 2009, 10:20 AM
I cant wait for the PM that says my LEDs are on the way!!!!

If I get them by this weekend, the LEDs will be installed by Monday.
therman
Jun 2 2009, 11:30 AM
Same here!
QUOTE (Maddevil1 @ Jun 2 2009, 11:20 AM)

I cant wait for the PM that says my LEDs are on the way!!!!

If I get them by this weekend, the LEDs will be installed by Monday.

Uhuru
Jun 2 2009, 02:02 PM
I'm looking for a couple of the pico lamps, 20k, if anyone has backed out or wants to sell me theirs...
sammy113
Jun 2 2009, 03:26 PM
I wish I don't receive any PM saying that they're on the way. I'd prefer just to have the surprise very unexpected lol
therman
Jun 4 2009, 10:53 PM
Any updates? Are you only shipping out on weekends?
evilc66
Jun 6 2009, 11:17 AM
All LED and lens only orders are shipped out (including yours therman, just been slacking on getting the PMs out). We are still on track for the shipping date for the drivers, so those should start shipping out to you guys in a little over a week.
therman
Jun 6 2009, 11:23 AM
Awesome! you da man!
sammy113
Jun 6 2009, 12:07 PM
underworld
Jun 8 2009, 03:28 PM
If anyone backs out of the 12" pico light or pico light retro , pm me I want it
not_sponsored
Jun 9 2009, 07:49 PM
Received my lenses in the mail yesterday, easiest install ever! Thanks again for organizing this evilc66
BIGGUN
Jun 9 2009, 08:58 PM
QUOTE (not_sponsored @ Jun 9 2009, 07:49 PM)

Received my lenses in the mail yesterday, easiest install ever! Thanks again for organizing this evilc66

SWEET!!!
I have only lenses and LEDS coming and I'm in PA so it shouldn't be TOO much longer!!!!
I'm SOOOOO impatient.
Kevin
ep32k2
Jun 9 2009, 09:21 PM
Any ETA on the Sunpod actinics Evil?
sammy113
Jun 9 2009, 11:08 PM
QUOTE (BIGGUN @ Jun 9 2009, 09:58 PM)

SWEET!!!
I have only lenses and LEDS coming and I'm in PA so it shouldn't be TOO much longer!!!!
I'm SOOOOO impatient.
Kevin
I'm in PR and I'm dying here. I should be the last one! Aaaaaaghhhh
Jacobnano
Jun 10 2009, 07:47 AM
hey if anyone backs out on a sunpod LED actinic tell me por favor.
evilc66
Jun 10 2009, 08:21 AM
They're coming guys. I'm swamped, so please be patient.
therman
Jun 10 2009, 10:18 AM
Got all 44 LEDs epoxied and wired on the heat sink yesterday, and every one works on the first try (something like a "hole in one").

It is B R I G H T!!!!
Just have to attach the fans and hang it tonight and I'll be done. Is there some sort of speed competition for LED builds?

Pics to come later. The wiring job was not planned well in a rush, so the arrangement of the circuits is a bit sloppy, but otherwise I am VERY happy.
Thanks Clive!
evilc66
Jun 10 2009, 10:25 AM
You're very welcome.
I'm starting a thread in the Lighting section to compile a list and links to all the LED projects that are active in NR. We have a ton started and running already, but with all the LEDs that are going out to people, we are going to see a lot more.
therman
Jun 11 2009, 12:34 AM
Got it running over the tank now...man the Crees are bright. Makes my old Luxeon 3/K2 fixture look like trash next to it. I'm running it with all 25 deg optics ~3ft from the corals and I still have it dimmed down. Corals are loving it! I really dig the tight optics high over the tank with lots of room to view from the top. Next tank might be 8 degree optics and fixture flush with the ceiling ;D
evilc66
Jun 11 2009, 08:21 AM
Nice. I'd love to see some pictures of that.
evilc66
Jun 12 2009, 11:14 AM
UPDATE: The first batch of drivers shipped from the distributor, and I should be seeing them Wednesday of next week. This will be only the first 90, so I won't be able to get all the orders covered right away. The remaining 51 are supposed to be here at the end of the month.
deepdvnarq
Jun 12 2009, 12:19 PM
Yaaaaahoooooooo!!!!!!!!
Time to get mean.... Meanwell that is
Man I can taste it
wfournier
Jun 12 2009, 12:39 PM
QUOTE (evilc66 @ Jun 12 2009, 11:14 AM)

UPDATE: The first batch of drivers shipped from the distributor, and I should be seeing them Wednesday of next week. This will be only the first 90, so I won't be able to get all the orders covered right away. The remaining 51 are supposed to be here at the end of the month.
Cool, how do you decide what ships when? Is it based off of the order that people placed their orders in?
Also any update on what I had PM'd you about?
evilc66
Jun 12 2009, 01:15 PM
Most likely I will ship in order of payment. That seems the fairest way to me. I'm sure some others might dissagree

I'll have to get back with you on that issue. I need to check some things out.
chazde3
Jun 12 2009, 01:40 PM
How about closest to you ships first?
evilc66
Jun 12 2009, 02:09 PM
Nice try
wfournier
Jun 12 2009, 02:11 PM
QUOTE (evilc66 @ Jun 12 2009, 02:15 PM)

Most likely I will ship in order of payment. That seems the fairest way to me. I'm sure some others might dissagree

I'll have to get back with you on that issue. I need to check some things out.
Cool thanks, I think that'll put me in the first group to go out. Sweet.
spanko
Jun 12 2009, 02:11 PM
Yeah that would be me anyway, I think I can probably spit to his house!!!!!!
I agree in payment order though really. Those that came to the table first get first production.
fishybear
Jun 12 2009, 02:17 PM
def think michiganders should get shipment first
supernip
Jun 12 2009, 05:14 PM
I was wondering if you could let me know if I'm in the first shipment for the drivers, evil?
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please
click here.