Will you be offering anytime soon a MH mod for the biocube? Especially the 29G,

Thanks

Ask and ye shall receive. Go here:

http://www.nanotuners.com/product_info.php...a9e65052a891e79

They just came out with it, but no Acitinic
http://www.nanotuners.com/product_info.php?products_id=363

~Brian

Thanks!

Any chance this will be available with actinics any time soon?

We decided to allow the end user to use his own bulb/ballast, which is why there isnt a separate kit. The biocube has 2 remote, independent ballasts, which can be used in conjunction with the Retro.

Why pay for something you dont need to buy?

HTH

Chris

Did you ever try this with a 150w mh bulb? If you did what issues did you run into? Were the heat issues a concern for the water temp or melting the plastic?

If a person made the plastic cover move 1" closer to the water, added larger fans in a push/push configuation and dremmeled a new vent near the feeding door do you think the heat could be dealt with enough so that a chiller isn't required?

Do you think with the above mods it would be possible to add another 70w mh to the kit you are selling?

what about upgrades for the 8G BC's?

heck what about a MH for the BC 14 while keeping the actincs.....

heck what about a MH for the BC 14 while keeping the actincs.....