NanoBob Posted May 7, 2005 Share Posted May 7, 2005 Well I had some time after work today and I finished the MOD I've been working on. There are quite a few pics, so bear with me. First is the raw material, black nylon. 12" x 5" x 1/2". Link to comment
NanoBob Posted May 7, 2005 Author Share Posted May 7, 2005 In the vice after cutting to size: 1 Link to comment
NanoBob Posted May 7, 2005 Author Share Posted May 7, 2005 last 1:Please let me know what you thing and if there are any improvements I can make. Thanks, Bob Link to comment
reef n ale Posted May 7, 2005 Share Posted May 7, 2005 Looks good Bob! Nice work! Rob Link to comment
patio Posted May 7, 2005 Share Posted May 7, 2005 in the second pic it looks like you have 3 more on the way! Link to comment
Chronicles Posted May 7, 2005 Share Posted May 7, 2005 right so lets get to the price then eh? Link to comment
barbadeau Posted May 8, 2005 Share Posted May 8, 2005 in the 6th pic, is it adjustable so that the unit can go higher, it looks like it hangs a centimeter or two below the surface Link to comment
NanoBob Posted May 9, 2005 Author Share Posted May 9, 2005 barbadeau: Yes it adjusts up and down. It will sit flush against the back all the way up to the top of the back wall. I have so low because that is where my water level was at the time. Link to comment
Daemonfly Posted May 9, 2005 Share Posted May 9, 2005 It looks good, but seems to be such a waste of material when you could do the same with thinner materials, and just glue the sides on. For example, 1/8" to 1/4" black acrylic. Don't even really have to glue anything if you have the acrylic bending heat strips and taper the bottom . Link to comment
saltkreep Posted June 10, 2005 Share Posted June 10, 2005 I dont see all kinds of water built up in the overflow chamber, and thats good! I think a little noise is o.k. Scott Link to comment
cathi's clown Posted July 20, 2005 Share Posted July 20, 2005 Are you still making your surface skimmers for sale? If so I would like one. Give me the particulars and I'll make immediate payment to you. Nice product by the way!! Link to comment
NanoBob Posted July 20, 2005 Author Share Posted July 20, 2005 cathi's clown: you have PM and see this thread for more details. http://www.nano-reef.com/forums/showthread...&threadid=61178 Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.